Up To Date HPE0-V14 Practice Exam For Building HPE Hybrid IT Solutions Certification

NEW QUESTION 1

A customer needs a shared storage solution for a virtualization platform that will host a database application. The customer is considering an HPE Nimble array.
Which feature would lead you to propose an HPE Nimble AF40 over an HPE 3PAR All Flash array?

• A. Fibre Channel Connectivity
• B. 10Gb iSCSI support
• C. Supported by Infosight for predictive analytics
• D. Predictable performance event with one failed controller

Answer: C

NEW QUESTION 2

ou are designing a system for a customer that runs an OLTP application. The customer has SAN based storage. They need to accelerate application performance.
Which HPE ProLiant Gen10 feature set will address this customer’s needs?

• A. intelligent system tuning
• B. intelligent provisioning
• C. CNSA suite
• D. scalable persistent memory

Answer: A

NEW QUESTION 3

A customer needs a new VMware environment for a critical stock trading application and will need high performance compute and low latency storage.
Identify the correct component configurations on the left and drag them to the answer area on the right. (Choose two.)

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 4

Match each workload profile description with the corresponding profile. (Select all that apply.)

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Missing Critical - Large number of database operations
Transactional Application Processing - Trades performance for reliability
General Peak Frequency Compute - Maximize processor speed

NEW QUESTION 5

A security client needs a surveillance solution to support 239 Cameras. They expect to generate 2PB of data and require a 10Gb network infrastructure in a single rack.
Which solution should you recommend to meet the customer requirements?

• A. HPE Moonshot
• B. HPE MSA
• C. HPE Apollo Servers
• D. HPE SimplVity 380

Answer: C

NEW QUESTION 6

A customer needs Layer 2 switches that provide basic functionality. In the future, this customer might need to use the switches’ CLI to configure VLAN and STP features.
Which category of the switches does meet the customer’s needs?

• A. unmanaged
• B. managed
• C. VLAN-based
• D. software distributed switch

Answer: B

NEW QUESTION 7

A customer needs a video archive repository initially starting at 30TB internal storage. The repository is expected to grow at 20% annually and should have a lifespan of 3 years.
Which HPE ProLiant server solution meets the customer’s requirements?

• A. HPE ProLiant DL560 Gen10 with LFF SAS drives
• B. HPE ProLiant DL380 Gen10 with LFF SAS drives
• C. HPE ProLiant ML110 with SFF SAS drives
• D. HPE ProLiant DL560 Gen9 with SFF SAS drives

Answer: B

NEW QUESTION 8

A customer needs a solution that will maintain data availability in their campus location. They require a multi-node system that can sustain multiple failures, including a full building outage.
Which HPE storage platform meets the customer’s needs?

• A. Nimble
• B. StoreVirtual
• C. StoreEasy
• D. MSA

Answer: D

NEW QUESTION 9

A customer has a small branch office that requires a tower-based server solution. The customer runs office-based applications and wants lights-out management capability.
Which HPE server family meets the customer’s needs?

• A. ProLiant ML
• B. ProLiant DL
• C. ProLiant BL
• D. ProLiant MicroServer

Answer: A

NEW QUESTION 10

While troubleshooting a HPE ProLiant Gen10 rack-mount server, you determine that the current and backup system ROMs are corrupt.
What should be the next step to fix the server?

• A. Restore the system firmware from a USB drive
• B. Restore the system firmware from a UEFI shell prompt
• C. Replace the CMOS battery
• D. Restore the system firmware from the iLO repository
• E. Replace the system board

Answer: E

NEW QUESTION 11

Refer to the exhibit.

An administrator connected a hypervisor to interface Ten-GigabitEthernet1/0/1 in a switch. The administrator created virtual machines in VLAN 10 and 20 on the hypervisor. VLAN 10 is configured to be tagged, and VLAN 20 is configured to be untagged on the hypervisor.
The administrator found that all the virtual machines in VLAN 20 can communicate with each other, but not with any virtual machines on VLAN 20 external to the hypervisor.
Given the output in the exhibit, what should you do to resolve the issue?

• A. Permit VLAN 1 on the interface.
• B. Configure the PVID of the interface to be VLAN 20.
• C. Configure the interface as an access port.
• D. Configure the interface as an IRF port.

Answer: D

NEW QUESTION 12

A customer environment is being managed and monitored with HPE OneView. A review of the OneView log shows that there have been several trap storm events.
Which series of events must take place for OneView to insert a Trap Storm event entry into the log of system events?

• A. SNMP traps from three or more identical hosts have been logged within the past 256 seconds.
• B. Four or more identical SNMP traps have been logged within the past 30 seconds.
• C. Three or more SNMP trap messages have been logged with increasingly critical variable string values.
• D. Four or more ports on the same network switch have reported sequential SNMP trap messages

Answer: C

NEW QUESTION 13

Which HPE solution brings together CPU, Memory, and Disk with an unpredictable workload into a single management infrastructure?

• A. dHCI
• B. SimpliVity
• C. Nimble
• D. Primera

Answer: B

NEW QUESTION 14

You are validating a configuration prior to quoting it for the customer. You plan to propose the following configuration:
Two HPE DL380 Gen10 servers with dual processors, 256GB of memory, dual 10Gb NICs, SN1100Q 16Gb dual port FC HBA, dual 800W power supplies, and high temperature fan kit
HPE Nimble HF20H with 11TB storage, 960GB of cache, dual port 10GbE NIC, and 16Gb dual port FC adapter kit
Two SN3000B FC Switches
Which tool should you use to verify firmware compatibility between the storage and server components in this proposed solution?

• A. HPE NinjaSTARS
• B. HPE One Configuration Advanced
• C. HPE OneView Advanced
• D. HPE SPOCK

Answer: D

NEW QUESTION 15

Match each characteristic to the correct storage type.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 16

When should you use the HPE Switch Selector?

• A. when you need to list the price information of the switches
• B. when you need to select a switch VLAN configuration
• C. when you need to compare features between multiple switches
• D. when you need to perform a competitive analysis between vendors

Answer: C

NEW QUESTION 17

A customer wants to safeguard their server firmware and asks you about the HPE ProLiant Gen10 features that provide this level of security.
Which Gen10 feature best addresses the customer’s concern?

• A. The Secure Boot feature in Gen10 servers checks the signature of the firmware drivers and other files to ensure that the firmware is trusted by the operating system.
• B. Gen10 servers use silicon root of trust to validate and detect corrupted firmware, and authentication to block unauthorized updates.
• C. Gen10 servers support data encryption at rest, which uses cryptography on the database housing the data and on the physical storage where the databases are stored.
• D. The Trusted Platform Module (TPM) in Gen10 servers protects firmware by using public and private key encryption.

Answer: B

NEW QUESTION 18

A company needs a solution that provides SMB and NFS file shares. The solution must have a built-in data backup to Microsoft Azure.
Which HPE solution meets the customer’s needs?

• A. StoreOnce 3520
• B. StoreEasy 1000
• C. StoreOnce VSA
• D. StoreVirtual VSA

Answer: B

NEW QUESTION 19

Match the storage technology to the storage type.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
BLOCK = iSCSi
File = CIFS BLOCK = SAN
File = NFS

NEW QUESTION 20

A client complains about systems reliability issues caused by their staff’s inability to identify the root cause of failures. The client’s lead administrator wants to automatically send data from HPE OneView to additional listeners in the network.
What should you configure in HPE OneView to enable the external monitoring of the managed devices?

• A. Configure a scope to include the listener.
• B. Configure SNMP Trap Forwarding.
• C. Configure scheduled reports to export the data to the listener.
• D. Configure the listener as a managed device.

Answer: B

NEW QUESTION 21

A customer needs to replace an existing storage array. The new array must be suitable for remote office deployment and support the following:
Multi-protocol connectivity
Flash-accelerated storage
Low-cost midline SAS drives
Which HPE storage platform will meet these requirements?

• A. StoreVirtual VSA
• B. MSA
• C. SimpliVity
• D. StoreEasy

Answer: B

NEW QUESTION 22

What is a primary benefit of DAS?

• A. It takes advantage of Common Internet File System (CIFS).
• B. It is presented as an iSCSI LUN to the attached server.
• C. It can be accessed by both server and non-server devices simultaneously.
• D. It is connected directly to a server.

Answer: C

NEW QUESTION 23
......