A Review Of Download NS0-184 Test Preparation

NEW QUESTION 1
You installed two separate clusters in an isolated data center without outbound network
access. The customer wants to troubleshoot issues locally and also create custom Excel reports for
capacity utilization from a local server.
In this scenario, which NetApp tool would satisfy this requirement?

• A. Active IQ Digital Advisor
• B. Cloud Insights
• C. ONTAP System Manager
• D. Active IQ Unified Manager

Answer: D

NEW QUESTION 2
You are installing a new ONTAP 9.8 cluster by using System Manager Guided Setup. In this scenario, which IP address is optional?

• A. node A IP address
• B. node B IP address
• C. gateway IP address
• D. cluster IP address

Answer: C

NEW QUESTION 3
You have added two new AFF A250 nodes to an existing 4-node cluster with NetApp CN1610 cluster
Network switches. Although the nodes can join the cluster, the storage failover show command output shows that the NVRAM log is not synchronized, and it cannot reach the partner over an HA interconnect.
In this scenario, which two statements are true? (Choose two.)

• A. The AFF A250 requires switches with 40GbE port support.
• B. The AFF A250 uses different ports for the cluster and the HA interconnect.
• C. The AFF A250 requires switches with 25GbE port support.
• D. The AFF A250 uses the same port for the cluster and the HA interconnect.

Answer: BC

NEW QUESTION 4
Click the Exhibit button.

You are attempting to add a new ONTAP 9.7 node to your ONTAP 9.8 NetApp cluster. After
attempting to add the node, it fails as shown in the exhibit.
What are two non disruptive ways to add the new node to your ONTAP cluster? (Choose two.)

• A. ReverttheclusterfromONTAP9.8toONTAP9.7.
• B. Re-initialize allthenodesintheONTAPclusterwithONTAP9.7.
• C. Upgrade the new node fromONTAP9.7toONTAP9.8.
• D. Add the node using the-allow-mixed-version-parameter.

Answer: CD

Explanation:
Reference: https://docs.netapp.com/us-en/ontap/pdfs/sidebar/Upgrade_ONTAP.pdf

NEW QUESTION 5
You installed a new 2-node FAS500f ONTAP 9.8 switchless cluster that serves NAS volumes to both
NFSv4.1 and SMB clients. The host operating systems have full flow control enabled on their data
ports.
In this scenario, which two flow control settings would you verify? (Choose two.)

• A. Verify thatthedatanetworkportshavefullflowcontroldisabled.
• B. Verifythattheclusternetworkportshavefullflowcontrolenabled.
• C. Verify thatthedatanetworkportshavefullflowcontrolenabled.
• D. Verifythattheclusternetworkportshavefullflowcontroldisabled.

Answer: AB

Explanation:
Reference: https://docs.netapp.com/us-en/ontap/pdfs/sidebar/Network_management.pdf

NEW QUESTION 6
Click the Exhibit button.

What are two functions of the four Ethernet switches in the supported configuration that is shown in the exhibit? (Choose two.)

• A. to provide a direct connection for the SnapMirror Synchronous (SM-S)
• B. to install cross-site cluster management switches
• C. to provide connectivity for NVRAM over iWARP
• D. to enable SyncMirror replication

Answer: AC

NEW QUESTION 7
You are preparing to add a 2-node AFF A250 system to an existing 4-node AFF A800 cluster with Cisco
Nexus 3232C switches. The cluster switches are currently running the Cluster-HA RCF.
In this scenario, which two steps are required to install the AFF A250 system? (Choose two.)

• A. Load the Storage RCF.
• B. Cable the AFF A250 nodes to the next free ports on the switch.
• C. Cable the AFF A250 nodes to the breakout ports on the switch.
• D. Load the Cluster-HA-Breakout RCF.

Answer: CD

NEW QUESTION 8
After the successful installation of a NetApp ONTAP cluster, the customer wants to know how to view
Telemetry data. The customer also wants to receive online information about any risks with the cluster and
potential bestpractice gaps.
Which tool satisfies the customer’s requirements?

• A. Active IQ Digital Advisor
• B. Interoperability Matrix Tool
• C. Spot by NetApp
• D. Cloud Manager

Answer: A

Explanation:
Reference: http://docs.netapp.com/us-en/ontap/pdfs/sidebar/Cluster_administration.pdf

NEW QUESTION 9
A host cannot connect to the namespace configured on an NVMe-enabled SVM. In this scenario, what are two reasons for this problem?
(Choose two.)

• A. The namespace has not been added to the subsystem.
• B. The namespace has not be added to the igroup.
• C. The igroup has an incorrect NQN.
• D. The subsystem has an incorrect NQN.

Answer: AD

NEW QUESTION 10
You are deploying a new AFF All SAN Array A250 into a customer’s existing data fabric.
In this scenario, which two tools would give insight into their existing Cisco MDS fabric configuration?
(Choose two.)

• A. Brocade SAN Health
• B. Cisco Data Center Network Manager (DCNM)
• C. Active IQ
• D. Active IQ Config Advisor

Answer: BC

Explanation:
Explanation\:
Reference: https://www.cisco.com/c/en/us/products/collateral/storage-networking/mds-9700-seriesmultilayerdirectors/
cisco-ucs-mds.html
https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-x-series-modularsystem/
flexpod-datacenter-ucs-intersight.html

NEW QUESTION 11
Which logical interface has a fixed firewall policy?

• A. data LIF
• B. cluster management LIF
• C. cluster LIF
• D. intercluster LIF

Answer: C

Explanation:
Reference: https://docs.netapp.com/usen/
ontap/networking/configure_firewall_policies_for_lifs.html#create-a-firewall-policy-andassigning-
it-to-a-lif

NEW QUESTION 12
You are preparing for the installation of a new AFF A400 system with NS224 NS224 storage shelves. You want to gather information on the connectivity options for the external shelves. In this scenario, which NetApp tool would you use for this task?

• A. Hardware Universe.
• B. Active IQ Config Advisor
• C. Active IQ Unified Manager
• D. Interoperability Matrix Tool

Answer: A

NEW QUESTION 13
After adding two nodes to an FC-enabled cluster, the storage administrator wants to ensure that existing LUNs can use paths on the new nodes.
What is required to complete this task?

• A. Use the storage port rescan command.
• B. Use the lun mapping add-reporting-nodes command.
• C. Use the lun bind create command.
• D. Rescan the bus on the hosts by using the rescan-scsi-bus.sh script.

Answer: AB

NEW QUESTION 14
Click the Exhibit button.

Immediately after installing a 4-node FAS8200 cluster, you discover that node, “cluster1-02”, must be
removed from the cluster. You want to use the cluster remove-node command to remove the node.
Referring to the exhibit, which two statements are correct? (Choose two.)

• A. Verify that high availability is configured for failover to the HA partner, then remove the node.
• B. Make the node ineligible by using the cluster modify -eligibility false command, then remove the node.
• C. Move Epsilon to cluster1-02, then remove the node.
• D. Remove the node, then the cluster will elect a new master to remain in quorum.

Answer: AC

NEW QUESTION 15
Click the Exhibit button.

You want to add an AFF A400 system to an existing 4-node cluster.
Referring to the exhibit, which number points to the ports that are used to cable the new nodes to
the cluster interconnect switches.

• A. 4
• B. 2
• C. 3
• D. 1

Answer: B

NEW QUESTION 16
You want to create a data volume on aggr0 and you receive a message with the following warning:
''Warning: You are about to create a volume on a root aggregate.
This may cause severe performance or stability problems and therefore is not recommended. Do you want
to proceed?''
What is the reason for this severe performance or stability problem?

• A. Controller failover and storage failover are separate processes that must occur in parallel, otherwiseproblems will arise.
• B. The performance load generated by the data volume can be very strong, so it should not be shared withvol0 on aggr0, requiring a separate aggregate for it.
• C. The performance load generated by the vol0 cannot be shared with any other volume on aggr0, requiringa dedicated aggregate for it.
• D. Controller failover and storage failover are separate processes that must occur at different times,otherwise problems will arise.

Answer: B

NEW QUESTION 17
You want to disconnect a DS224C shelf with 3.8 TB NetApp Storage Encryption (NSE) SSDs to an AFF
A300HApairwithtwoDS224C shelveswith3.8 TB SSDs without NSE in one stack.
In this scenario, how would you add the shelf?

• A. Addtheshelftothe existingstack.
• B. Create a newstackon the HA pairto add the shelf.
• C. Connectthe shelfto anHA pair withNSE drives.
• D. LicenseNSE and add the shelfto thisHA pair as a new stack.

Answer: A

NEW QUESTION 18
An administrator issued the cluster setup command and configured a 2-node ONTAP 9.8 cluster.
In this scenario, which tool would the administrator use to validate the configuration?

• A. Active IQ Upgrade Advisor
• B. Interoperability Matrix Tool
• C. NetAppDocs
• D. Active IQ Config Advisor

Answer: C

NEW QUESTION 19
You are expanding an existing 4-node ONTAP 9.8 cluster with a FAS8300 HA pair by adding a new FAS500f HA pair. Before the expansion, you are asked to save the configuration of the cluster to a backup file.
In this scenario, which two ONTAP configuration backup methods are available? (Choose two.)

• A. storage VM
• B. node
• C. cluster
• D. switch

Answer: AC

Explanation:
Reference: https://docs.netapp.com/us-en/ontap-whatsnew/pdfs/fullsitesidebar/TR_4894NetApp_ONTAP_9_9_1_Feature_Overview.pdf

NEW QUESTION 20
Click the Exhibit button.

Referring to the numbers shown in the exhibit, which port on an AFF A220 controller is used as port e0M in
ONTAP?

• A. 4
• B. 3
• C. 2
• D. 1

Answer: A

NEW QUESTION 21
......