Top Tips Of Renovate DES-4122 Questions Pool

NEW QUESTION 1

A technician wants to remotely log in to a server but finds that the IDRAC virtual Console feature Is not available. Use the simulator to explore the system. What Is the cause of this Issue?


Note: It is necessary to dose (x) the simulator window before you can select a response to this question.

• A. The Virtual Console is disabled
• B. Operating system not installed on remote server
• C. The server has been powered down
• D. There are more than the maximum number of active sessions

Answer: C

NEW QUESTION 2

When does a customer require the Service Tag of the Dell EMC PowerEdge server?

• A. First time logging in to iDRAC
• B. First time accessing the BIOS
• C. Activating the OS
• D. Obtaining warranty information

Answer: A

NEW QUESTION 3

A Dell EMC PowerEdge 14G server uses Intel OPTANE DC Persistent Memory in App Direct mode. What is the minimum size DIMM supported for this type of memory?

• A. 64 GB
• B. 128 GB
• C. 256 GB
• D. 512 GB

Answer: C

NEW QUESTION 4

A technician needs to update the IDRAC license on a Dell EMC PowerEdge R740 server from Express to Enterprise. The server has the following components:
* 2x CPUs
* 384 GB RAM
* 6x 1 TB drives
* 1x PSU
The server is connected to active AC, but it is powered down, and it needs to stay powered down No errors are presently displayed
How can the technician upgrade the license?

• A. The license cannot be upgraded on a single PSU system
• B. Power on the server, then connect to the iDRAC and upgrade iDRAC license before powering down the server
• C. The license cannot be upgraded because the user will not allow the server to be powered on
• D. Connect to the iDRAC GUI and upgrade the .DRAC license while the server .s powered down

Answer: A

NEW QUESTION 5

A company that has very specific firmware requirements has acquired Dell EMC PowerEdge servers Any replaced parts of the type must match the original parts identically. The procedure must be as simple as possible with minimal risk.
What action should a technician take to help accomplish this goal?

• A. Configure servers to access the remote firmware repository
• B. Enable the Match Firmware of Replaced Part setting in the system BIOS
• C. Install and configure a repository manager
• D. Enable the Collect System Inventory On Restart (CSIOR) attribute

Answer: A

NEW QUESTION 6

A technician needs to change the iDRAC password on a Dell EMC PowerEdge 14G server in a lights-out datacenter. The be rebooted because it is in production. The iDRAC is configured with the default credentials
How could the technician change the iDRAC password?

• A. SupportAssist Enterprise
• B. iDRAC Web GUI
• C. OpenManage Server Administrator
• D. Virtual Console; press F2 after rebooting system

Answer: A

NEW QUESTION 7

After completing a disk rebuild operation, a technician needs to configure the system so that the rebuild process happens faster the expense of slowing users down.
Which setting should be changed?

• A. Rebuild Rate in the BIOS settings
• B. System Profile to Performance in the BIOS settings
• C. System Profile to Performance in the iDRAC GUI
• D. Rebuild Rate in the iDRAC GUI

Answer: D

NEW QUESTION 8

What are key values related to systems management when deploying OpenManage Enterprise wit Dell EMC PowerEdge servers?

• A. AutomateBasic Hardware Element Management Agent-free ManagementSimple and effective
• B. SimplifyBasic Hardware Element Management Agent-free ManagementFee-based license
• C. SimplifyFee-based license Agent-free Management Secure
• D. Simplify Unify AutomateSecure

Answer: C

NEW QUESTION 9

What are the default settings used when applying firmware and a configuration to a replaced part using the Lifecycle Controller?

• A. Firmware: Upgrade to latest available version Configuration Apply always
• B. Firmware Allow version upgrade only Configuration: Disabled
• C. Firmware: Match firmware of replaced part Configuration Apply always
• D. Firmware DisabledConfiguration Apply only if firmware match

Answer: C

NEW QUESTION 10

What is a key feature introduced in OpenManage Mobile v2.0?

• A. Access servers remotely through OME
• B. Access SupportAssist reports
• C. Access a Virtual Console (VNC over SSH) securely
• D. Access iDRAC remotely

Answer: B

NEW QUESTION 11

Which mobile devices are supported by Quick Sync 2.0 in 14G PowerEdge servers?

• A. Android devices only
• B. iOS, Android, and Windows Phone devices
• C. iOS and Android devices only
• D. iOS devices only

Answer: C

NEW QUESTION 12

You are Investigating a disk error on a Dell EMC PowerEdge server and discover a Hot Spare has not been assigned to the Virtual Disk Group. Use the simulator to assign the Global Hot Spare. When you have finished using the simulator, dick Next.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 13

What happened on April 30, 2019?


Note: It is necessary to dose (x) the simulator window before you can select a response to this question.

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: C

NEW QUESTION 14

What is the drive characteristic of a BOSS M.2 drive in a Dell EMC PowerEdge server?

• A. Single-level cell
• B. Read Intensive
• C. Quad-level cell
• D. Write Intensive

Answer: A

NEW QUESTION 15

A Dell EMC PowerEdge server has been updated with an LCC and iDRAC DUP to the latest firmware when performing a firmware rollback?

• A. Both the iDRAC and the LCC can be rolled back
• B. The LCC can be rolled back; the iDRAC cannot be rolled back
• C. The iDRAC can be rolled back; the LCC cannot be rolled back
• D. The iDRAC cannot be rolled back and the LCC cannot be rolled back

Answer: B

NEW QUESTION 16
......