Act now and download your Network Appliance NS0-506 test today! Do not waste time for the worthless Network Appliance NS0-506 tutorials. Download Up to the immediate present Network Appliance NetApp Certified Implementation Engineer - SAN, Clustered Data ONTAP exam with real questions and answers and begin to learn Network Appliance NS0-506 with a classic professional.

2021 Nov NS0-506 download

Q1. You have a 4-node FAS8040 cluster licensed for FCP and iSCSI. Each node has both FC and iSCSI LIFs. One of your Windows 2012 Servers has a single 8Gb FC port and a single 10 Gb Ethernet port with switched connectivity to the FC and Ethernet ports on the cluster. You need to use both ports on the host for multipath access to a LUN on the NetApp cluster.

What will accomplish this task?

A. NetApp Data ONTAP DSM for Windows MPIO

B. FCoE HBA

C. iSCSI HBA

D. native Windows MPIO

Answer: A


Q2. You currently have the following configuration on your cluster: 

cl01::>igroup show –instance

Vserver Name: svm1 

Igroup Name: ig2 

Protocol: mixed

OS Type: linux

Portset Binding Igroup: –

Igroup UUID: 3fb136c7–cfd6–11df–a9ab–123478563412 

Initiators: –

What must you do to limit the LIFs that are used by an initiator to access a LUN?

A. Create a portset.

B. Create an additional igroup.

C. Change the protocol to iSCSI.

D. Change the OS type to windows_gpt.

Answer: A

Explanation: Reference:https://library.netapp.com/ecmdocs/ECMP1368525/html/GUID-5CC27202- A43F-429F-AB13-C70E7CD58E09.html


Q3. Click the Exhibit button.

A customer has deployed a new FAS8080EX running clustered Data ONTAP 8.3. Host A is running multipath software that has been properly configured. Also, Host A is currently accessing a LUN using the FC protocol stored on Node A. Switch A, shown in the exhibit, fails.

What will happen next?

A. Node A will panic causing a storage failover to Node B.

B. Host A will lose all access to its LUN.

C. Host A will continue to access its LUN using Switch B through Node B.

D. Host A will continue to access its LUN using Switch B through Node A.

Answer: B


Q4. A customer has a clustered Data ONTAP solution and needs to connect several Windows 2012 servers using iSCSI for LUN access.

Before the LUN can be seen, what must be configured on the host?

A. the LUN partitioning

B. the Host Utilities Kit

C. the iSCSI software initiator

D. the HBA queue depth

Answer: B


Q5. You have executed the following FC configuration workflow:

1. Verify IMT supported configuration.

2. Install VSC for VMware vSphere on a Windows Server.

3. Add the storage cluster to VSC and set recommended values. 

4.Update host HBA firmware and BIOS.

5. Provision the LUN.

6. Manually create an igroup and add the host WWPNs into it.

7. Map the LUN to the igroup.

8. Create datastore and its containing LUNS and volumes.

In step 8, you are not able to see the LUNs you provisioned on your storage controller. When you runigroup showyou see the ESX host’s initiators; however, they are listed “not logged in”.

What is the problem?

A. You need to configure ALUA.

B. TheLUN was not put online.

C. The LUN type is not set to type VMware.

D. You need to configure zoning.

Answer: D


Refresh NS0-506 exam:

Q6. Click the Exhibit button.

Based on the exhibit, you are configuring a 4-node cluster with an iSCSI LIF ob each node. You connect using the first LIF from a Windows Server 2012 host.

How would you add the other three LIFs?

A. Use the MCS button.

B. Use the Devices button.

C. Use the Add session button.

D. Wait and then press the Refresh button until the other sessions appear.

Answer: C


Q7. Click the Exhibit button.

Referring to the diagram shown in the exhibit, what will happen if PDU-B fails?

A. Both Node A and Node B will remain online and all disk shelves will remain online.

B. Both Node A and Node B will remain online, but all disk shelves will immediately lose power and become inaccessible.

C. Both Node A and Node B willimmediately lose power and become inaccessible.

D. Node A will immediately lose power and become inaccessible. Node B will remain online.

Answer: A


Q8. You are asked to configure the Service Processor on a newly installed node, and must verify the following command:

system-service processor network modify –node local –address-family IPv4 –enable true

-ip-address 192.168.123.98 –netmask 255.255.255.0 Which statement about this command is true?

A. –nodeshould reference the actual node name.

B. The gateway IP address is missing.

C. The Link Local IP Address is missing.

D. IPv6 is required for the SP.

Answer: A


Q9. Microsoft ODX supports which scenario on clustered Data ONTAP 8.3?

A. moving a VHDX with both SMB 3.0 and SAN protocols as either source or destination

B. moving a VHDX from an SMB 3.0 source to an SMB 3.0 destination with no SAN support

C. moving a VHDX from a SAN LUN source to a SAN LUN destination with no SMB support

D. moving a VHDX with both SMB 2.1 and SAN protocols as either source or destination

Answer: D


Q10. You configure space-reserved LUNs on thick-provisioned volumes, and you want to guarantee overwrites.

How would you accomplish this task?

A. Set the fractional reserve to 0%.

B. Enable space allocation.

C. Set the fractional reserve to 100%.

D. Disable the fractional reserve.

Answer: A

Explanation: Reference:https://library.netapp.com/ecm/ecm_download_file/ECMP1636035(page 18)