Exam Code: NS0-506 (Practice Exam Latest Test Questions VCE PDF)
Exam Name: NetApp Certified Implementation Engineer - SAN, Clustered Data ONTAP
Certification Provider: Network Appliance
Free Today! Guaranteed Training- Pass NS0-506 Exam.

2021 Nov NS0-506 book

Q21. A customer has recently deployed a clustered Data ONTAP 8.3 system and is trying to mount LUNs to a Windows 2012 Server using the iSCSI protocol. They have enabled jumbo frames on their nodes as well as their Windows 2012 Server. Whenever they attempt to scan for a new LUNs, Disk Management times out and does not present any new storage.

What is causing the problem?

A. Windows 2012 does not support jumbo frames with the iSCSI protocol.

B. Clustered Data ONTAP 8.3 does not support the iSCSI protocol.

C. They have jumbo frames enabled on the host and storage, but not the Ethernet switches.

D. Clustered Data ONTAP 8.3 does not support jumbo frames with the iSCSI protocol.

Answer: C


Q22. Which protocol allows to access a controller’s CLI interface?

A. SSH

B. NTP

C. TFTP

D. IMAP

Answer: A

Explanation: Reference:https://library.netapp.com/ecm/ecm_download_file/ECMP1196798(page 11)


Q23. You want to prevent an FCoE frame from being split into two Ethernet frames. What is the minimum required frame size that will satisfy this requirement?

A. 9216

B. 2240

C. 1512

D. 9000

Answer: B


Q24. Which command enables the FC protocol on clustered Data ONTAP?

A. vserverfpolicy enable –vserver<node_name> –policy –name <policy_name>

–sequence– number <seq_num>

B. vserverfcp create –vserver<vserver_name> –status –adain up

C. node run node <node_name>fcadmincongig –e

D. vserveriscsi create–vserver<vserver_name> -target –alias <vserver_name>

Answer: B

Explanation: Reference:https://library.netapp.com/ecmdocs/ECMP1196817/html/vserver/fcp/create.html


Q25. A customer is experiencing slower than expected performance on a database connected to an iSCSI LUN. They are surprised that performance has decreased even though they have upgraded from a 1 GB to a 10 GB switch.

What are three causes for this problem? (Choose three.)

A. Spanning Tree is incorrectly configured on the cluster nodes.

B. There is a faulty cable or SFP in the data path.

C. There is an MTU mismatch between the hosts, controllers, and switch.

D. Flow control is incorrectly set on either the host or controllers.

E. Routing is not set up between the iSCSI and cluster networks.

Answer: A,B,C


Improve NS0-506 latest exam:

Q26. On a Windows 2012 Server, the FC load balance policy is configured using which two utilities? (Choose two.)

A. NetApp OnCommand System Manager

B. Data ONTAP DSM for Windows MPIO

C. Windows MPIO

D. Unified Host Utilities

Answer: B,D

Explanation: Reference:https://library.netapp.com/ecmdocs/ECMP1656700/html/GUID-243B543E-070F- 46E9-9636-6CF8B91EEB82.html


Q27. Which two flags would you use to enable NetApp thin provisioning on a LUN? (Choose two.)

A. –space–reserve enabled –space–allocation enabled

B. –space–reserve enabled –space–allocation enabled

C. –space–reserve disabled –space–allocation disabled

D. –space–reserve disabled –space–allocation enabled

Answer: A,C


Q28. Click the Exhibit button. 

cl01::>lun resize –vserver

svm1 –volume db1_vol –lun db1

-size 4096g

Error: command failed: New

size exceeds this LUN’s 

initial geometry

cl01::>

What is the reason for the error shown in the exhibit?

A. The LUN is thin provisioned, but the parent volume is thick provisioned and cannot satisfy the request.

B. The aggregate over commitment threshold has been exceeded.

C. The parent volume that contains the LUN is out of space.

D. The LUN cannot be grown past its maximum resize size.

Answer: D

Explanation: Reference:http://community.netapp.com/t5/VMware-Solutions-Discussions/lun-resize/td- p/8608


Q29. An administrator wants to provide isolation among physical devicesconnected to the same FCP fabric. Which Cisco switch feature accomplishes this task?

A. VSAN

B. FSIP

C. LUN masking

D. logical domains

Answer: A

Explanation: VSANs provide the following capabilities:

•Isolate devices physically connected to the same fabric. Reference:http://www.cisco.com/en/US/products/ps5989/prod_troubleshooting_guide_chap ter09186a008067a306.html


Q30. You are planning to move to a newer clustered Data ONTAP version. Which two resources should you review prior to the move? (Choose two.)

A. Software Setup Guide

B. IMT

C. Upgrade Advisor

D. System Administration Guide for Cluster Administrators

Answer: B,C 

Explanation: Reference:https://library.netapp.com/ecmdocs/ECMP1368868/html/GUID-9194A9CF- F7F8-48B5-82B0-D494D3D64105.html