Want to know Exambible 156-315.77 Exam practice test features? Want to lear more about Check Point Check Point Security Expert R77 certification experience? Study Guaranteed Check Point 156-315.77 answers to Renewal 156-315.77 questions at Exambible. Gat a success with an absolute guarantee to pass Check Point 156-315.77 (Check Point Security Expert R77) test on your first attempt.
2021 Sep 156-315.77 test engine
Q91. - (Topic 5)
You must set up SIP with a proxy for your network. IP phones are in the 172.16.100.0 network. The Registrar and proxy are installed on host 172.16.100.100. To allow handover enforcement for outbound calls from SIP-net to network Net_B on the Internet, you have defined the following objects:
Network object: SIP-net: 172.16.100.0/24
SIP-gateway: 172.16.100.100
VoIP Domain object: VolP_domain_A
1.Endpoint domain: SIP-net
2.VoIP gateway installed at: SIP-gateway host object
How would you configure the rule?
A. SIP- G ateway/N et_B/s i p_a ny/a c c e pt
B. VolP_domain_A/Net_B/sip/accept
C. SIP-Gateway/Net_B/sip/accept
D. VolP_domain_A/Net_B/sip_any, and sip/accept
E. VolP_Gateway_MJet_B/sip_any/accept
Answer: B
Q92. - (Topic 5)
Why should the upgrade_export configuration file (.tgz) be deleted after you complete the import process?
A. It will prevent a future successful upgrade_export since the .tgz file cannot be overwritten.
B. It will conflict with any future upgrades run from SmartUpdate.
C. SmartUpdate will start a new installation process if the machine is rebooted.
D. It contains your security configuration, which could be exploited.
Answer: D
Q93. - (Topic 3)
TheSmart EventClient:
A. analyzes each IPS log entry as it enters the Log server.
B. displays the received events.
C. adds events to the events database.
D. assigns a severity level to an event.
Answer: B
Q94. - (Topic 2)
After you add new interfaces to a cluster, how can you check if the new interfaces and the associated virtual IP address are recognized by ClusterXL?
A. By running the command cphaprob state on both members
B. By running the command cpconfig on both members
C. By running the command cphaprob -I list on both members
D. By running the command cphaprob -a if on both members
Answer: D
Q95. CORRECT TEXT - (Topic 7)
MultiCorp is located in Atlanta. It has a branch office in Europe, Asia, and Africa. Each location has its own AD controller for local user login. How many ADqueries have to be configured?
Answer: 4
Rebirth 156-315.77 exams:
Q96. - (Topic 4)
If Jack was concerned about the number of log entries he would receive in the SmartReporter system, which policy would he need to modify?
A. Consolidation Policy
B. Log Consolidator Policy
C. Log Sequence Policy
D. Report Policy
Answer: A
Q97. - (Topic 3)
Review the Rule Base displayed.
For which rules will the connection templates be generated in SecureXL?
A. Rule nos. 2 and 5
B. Rule no. 2 only
C. All rules except rule no. 3
D. Rule nos. 2 to 5
Answer: B
Q98. - (Topic 3)
Your customer asks you about the Performance Pack. You explain to him that a Performance Pack is a software acceleration product which improves the performance of the Security Gateway. You may enable or disable this acceleration by either:
1) thecommand:cpconfig 2) the commanD .fwaccel on|off
What is the difference between these two commands?
A. The fwaccel command determines the default setting. The command cpconfig can dynamically change the setting, but after the reboot it reverts to the default setting.
B. Both commands function identically.
C. The command cpconfig works on the Security Platform only. The command fwaccel can be used on all platforms.
D. The cpconfig command enables acceleration. The command fwaccel can dynamically change the setting, but after the reboot it reverts to the default setting.
Answer: D
Q99. - (Topic 2)
How can you view the critical devices on a cluster member in a Cluster XL environment?
A. cphaprob -ia list
B. cphaprob -a if
C. cphaprob -a list
D. cphaprob -ia if
Answer: A
Q100. - (Topic 3)
What is theSmart EventAnalyzer's function?
A. Assign severity levels to events.
B. Analyze log entries, looking for Event Policy patterns.
C. Display received threats and tune the Events Policy.
D. Generate a threat analysis report from the Analyzer database.
Answer: A