Master the 199-01 Riverbed Certified Solutions Professional content and be ready for exam day success quickly with this Testking 199-01 pdf exam. We guarantee it!We make it a reality and give you real 199-01 questions in our Riverstone 199-01 braindumps.Latest 100% VALID Riverstone 199-01 Exam Questions Dumps at below page. You can use our Riverstone 199-01 braindumps and pass your exam.

Q31. Your Steelhead appliance deployment includes users accessing the Internet from branch offices with the traffic being back-hauled to the data center before going out to the Internet. However,

HTTP latency optimization does not appear to be very effective, and in certain cases, is slower than without optimization. What settings might help with this Internet-bound traffic?

A. Riverbed recommends you turn off URL Learning and Parse-and-Prefetch and only enable OPT

B. Riverbed recommends you enable URL Learning and Parse-and-Prefetch and turn off OPT

C. Riverbed recommends you turn off URL Learning and only enable Parse-and-Prefetch and OPT

D. Riverbed recommends you turn off URL Learning, Parse-and-Prefetch, and OPT

E. Riverbed recommends you enable URL Learning, Parse-and-Prefetch, and OPT

Answer: A


Q32. If the VPN concentrator that a Steelhead Mobile client connects to is not in path with a Steelhead appliance, what changes could be made to the Riverbed infrastructure to allow optimization from the Steelhead Mobile clients?

A. Enable out-of-path support on server-side Steelhead

B. Add a fixed-target rule in the Steelhead Mobile Acceleration policy

C. Enable peering rule in Steelhead Mobile client

D. B and C

E. A and B

Answer: E


Q33. What is the command to view configuration files on the CLI?

A. configuration files display

B. configuration files view

C. configuration files show

D. show configuration files

E. show configuration files all

Answer: D


Q34. You are configuring HighSpeed TCP in an environment with an OC-3 (155Mb/s) and 60 milliseconds of round-trip latency. You know that the rule of thumb is to set the Steelhead appliance's WAN Default Send Buffer Size and WAN Default Receive Buffer Size to 2*BDP for the link. The buffer size setting for this link would be closest to: (Hint: Use the calculator)

A. 4,665,000 bytes

B. 9,330,000 bytes

C. 3,110 bytes

D. 6,220 bytes

E. 2,325,000 bytes

Answer: E


Q35. Which of the following commands would allow you to generate a system dump from the CLI?

A. sysdump

B. dump generate

C. debug generate dump

D. sysdump generate dump

E. dump generate ­w filename

Answer: C


Q36. The client-side Steelhead appliance has been configured for OOB Destination Transparency, what should the source IP/port be for the OOB connection?

A. Client IP/random port

B. Client-side Steelhead appliance in-path IP/random port

C. Client IP/port 708

D. Client-side Steelhead appliance in-path IP/port 708

E. None of the above

Answer: B


Q37. What ports are required for proper operation of the Steelhead Mobile client?

A. 7800 outbound, 7801 inbound, 7870 outbound

B. 7800 inbound, 7870 inbound, 7870 outbound

C. 7800 inbound, 7801 outbound, 7870 outbound

D. None of the above

Answer: A


Q38. The WCCP protocol has a methodology of load balancing with two or more Steelhead appliances. What is the maximum number of buckets used for the HASH assignment?

A. 8

B. 32

C. 64

D. 128

E. 256

Answer: E


Q39. If using Fixed-target rules, what Steelhead specific probe options are associated with the SYN packet?

A. Option-76 (0x4c)

B. Option-78 (0x4e)

C. Client-side Steelhead's in-path IP address

D. Client-side Steelhead's port number

E. No probes are sent with fixed-target rules

Answer: E


Q40. Which of the following configuration policies are supported on the CMC appliance? (Select 4)

A. Security Policy

B. Optimization Policy

C. System Setting Policy

D. License Policy

E. Networking Policy

Answer: ABCE


Q41. When deploying policy-based routing for multiple Steelhead appliances in a cluster, the router should be configured to: (Select 2)

A. Set IP next-hop address to the virtual IP address of the Steelhead appliance cluster

B. Set IP next-hop addresses for each Steelhead appliance

C. Check the state level information on each Steelhead appliance via SLA or CDP

D. Auto-detect the Steelhead appliance clustering protocol

E. Check the state level information on the virtual IP address of the Steelhead appliance cluster

Answer: BC


Q42. When using Correct Addressing and enhanced auto-discovery (EAD), what is the size of the probe response in the return SYN/ACK packet from the server?

A. 4 bytes

B. 10 bytes

C. 14 bytes

D. 18 bytes

E. 32 bytes

Answer: D


Q43. Where are SDR references maintained on a Steelhead appliance?

A. Persistent storage

B. USB keys

C. Flash storage

D. RSP partition

E. Configuration file

Answer: A


Q44. Refer to the exhibit.

What option in the Acceleration policy used on Steelhead Mobile Client A will most likely enhance the users experience connecting to Server B, if Server B is an Exchange 2003 Server?

A. Enable MAPI NSPI

B. Increase the datastore size

C. Enable latency-based location awareness

D. Enable SSL optimization and import the Exchange certificate for Server B into Steelhead B

E. Peering rule rejecting optimization with Steelhead A

Answer: C


Q45. WCCP uses bits to create and distribute buckets. Using MASK assignment, what is the maximum number of bits used?

A. 4

B. 7

C. 8

D. 32

E. 256

Answer: B