Actualtests offers free demo for 300 075 vce exam. "Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2)", also known as 300 075 vce exam, is a Cisco Certification. This set of posts, Passing the Cisco 300 075 dump exam, will help you answer those questions. The 300 075 vce Questions & Answers covers all the knowledge points of the real exam. 100% real Cisco 300 075 pdf exams and revised by experts!
Q16. Refer to the exhibit.
With the Mobile Connect feature configured, when the PSTN phone calls the Enterprise user at extension 3001, the Enterprise user's mobile phone does not ring. Which CSS is responsible for ensuring that the correct partitions are accessed when calls are sent to the Enterprise user's mobile phone?
A. the gateway CSS
B. the Phone Device CSS
C. the Remote Destination Profile CSS
D. the Remote Destination Profile Rerouting CSS
E. the Phone Line (DN)CSS
Answer: D
Explanation:
Incorrect Answer: A, B, C, E
Ensure that the gateway that is configured for routing mobile calls is assigned to the partition that belongs to the Rerouting Calling Search Space. Cisco Unified Communications Manager determines how to route calls based on the remote destination number and the Rerouting Calling Search Space. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmfeat/fsmobmgr .html
Q17. Company X has a Cisco Unified Communications Manager cluster and a VCS Control server with video endpoints registered on both systems. Users find that video endpoints registered on Call manager can call each other and likewise for the endpoints registered on the VCS server. The administrator for Company X realizes he needs a SIP trunk between the two systems for any video endpoint to call any other video endpoint. Which two steps must the administrator take to add the SIP trunk? (Choose two.)
A. Set up a SIP trunk on Cisco UCM with the option Device-Trunk with destination address of the VCS server.
B. Set up a subzone on Cisco UCM with the peer address to the VCS cluster.
C. Set up a neighbor zone on the VCS server with the location of Cisco UCM using the menu option VCS Configuration > Zones > zone.
D. Set up a SIP trunk on the VCS server with the destination address of the Cisco UCM and Transport set to TCP.
E. Set up a traversal subzone on the VCS server to allow endpoints that are registered on Cisco UCM to communicate.
Answer: A,C
Q18. Refer to the exhibit.
IT shows an H.323 gateway configuration in a Cisco Unified Communications Manager environment. An inbound PSTN call to this H.323 gateway fails to connect to IP phone extension 2001. The PSTN user hears a reorder tone. Debug isdn q931 on the H.323 gateway shows the correct called-party number as 5015552001. Which two configuration changes can correct this issue? (Choose two.)
A. Add port 1/0:23 to dial-peer voice 123 pots.
B. Ensure that the Significant Digits for inbound calls on the H.323 gateway configuration is 4.
C. Add a voice translation profile to truncate the number from 10 digits to 4 digits. Apply the voice translation profile to the Voice-port. The configuration field "Significant Digits for inbound calls" is left at default (All).
D. Add the command h323-gateway voip id on interface vlan120.
E. Change the destination-pattern on the dial-peer voice 23000 VoIP to 501501? and change the Significant Digits for inbound calls to 4.
Answer: B,E
Explanation:
Incorrect Answer: A, C, D Choose the number of significant digits to collect, from 0 to 32. Cisco Unified Communications Manager counts significant digits from the right (last digit) of the number that is called. Link: http://cisco.biz/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b06trunk.html
Q19. Which statement about enrollment in the IP telephony PKI is true? (Source. Understanding Cisco IP Telephony Authentication and Encryption Fundamentals)
A. CAPF enrollment supports the use of authentication strings.
B. The CAPF itself has to enroll with the Cisco CTL client.
C. LSCs are issued by the Cisco CTL client or by the CAPF.
D. MICs are issued by the CAPF itself or by an external CA.
Answer: A
Explanation:
Incorrect Answer: B, C, D
The CAPF enrollment process is as follows:
1. The IP phone generates its public and private key pairs.
2. The IP phone downloads the certicate of the CAPF and uses it to establish a TLS session with the CAPF.
3. The IP phone enrolls with the CAPF, sending its identity, its public key, and an optional authentication string.
4. The CAPF issues a certicate for the IP phone signed with its private key.
5. The CAPF sends the signed certicate to the IP phone.
Link: http://my.safaribooksonline.com/book/certification/cipt/9781587052613/understanding-cisco-ip-telephony-authentication-and-encryption-fundamentals/584.
Q20. Which two options for a Device Mobility-enabled IP phone are true? (Choose two.)
A. The phone configuration is not modified.
B. The roaming-sensitive parameters of the current (that is, the roaming) device pool are applied.
C. The user-specific settings determine which location-specific settings are downloaded from the Cisco Unified Communications Manager device pool.
D. If the DMGs are the same, the Device Mobility-related settings are also applied.
Answer: B,D
Q21. When implementing a dial plan for multisite deployments, what must be present for SRST to work successfully?
A. dial peers that address all sites in the multisite cluster
B. translation patterns that apply to the local PSTN for each gateway
C. incoming and outgoing COR lists
D. configuration of the gateway as an MGCP gateway
Answer: B
Q22. How does the system intelligently shift call processing upon restoration of WAN connectivity?
A. automatically back to the primary Cisco Unified Communications Manager cluster
B. manually back to the primary Cisco Unified Communications Manager cluster
C. automatically back to the secondary Cisco Unified Communications Manager cluster
D. manually back to the secondary Cisco Unified Communications Manager cluster
Answer: A
Q23. When an H.323 trunk is added for Call Control Discovery, which statement is true?
A. The H.323 trunk is added by selecting Inter-Cluster Trunk (Non-Gatekeeper Controlled) and Device Protocol Inter-Cluster Trunk. The Enable SAF check box should be selected in the trunk configuration.
B. The H.323 trunk is added by selecting Inter-Cluster Trunk (Non-Gatekeeper Controlled) and Device Protocol Inter-Cluster Trunk. The Trunk Service Type should be Call Control Discovery.
C. The H.323 trunk is added by selecting Call Control Discovery Trunk and then selecting
H.323 as the protocol to be used.
D. The H.323 trunk is added by selecting H.323 Trunk, and selecting Inter-Cluster Trunk as the Device Protocol. The destination IP address field is configured as ‘SAF’ to indicate that this trunk is used for SAF.
Answer: A
Explanation:
Reference. Implementing Cisco Unified Communications Manager Part 2 (CIPT2), Chapter3: Implementing Multisite Connections, pg 70-71, Fig 3-14 and Fig 3-15
Q24. Refer to the exhibit.
Which option describes the effect of this configuration?
A. It implements Cisco United CME redundancy.
B. It creates dial peers.
C. It configures failover.
D. It configures a standby Cisco United CME.
E. It implements HSRP.
F. It implements Cisco IOS redundancy.
Answer: A
Q25. When an incoming PSTN call arrives at an MGCP gateway, how does the called number get normalized to an internal directory number in Cisco Unified Communications Manager?
A. Normalization is done by configuring the significant digits for inbound calls on the MGCP gateway.
B. Normalization is done using route patterns.
C. Normalization is done using the gateway incoming called party prefixes based on number type.
D. Normalization is done using the gateway incoming calling party prefixes based on number type.
E. Normalization is achieved by local route group that is assigned to the MGCP gateway.
Answer: A
Q26. Which statement is true when considering a Cisco VoIP environment for regional configuration?
A. G.711 requires 128K of bandwidth per call.
B. G.729 requires 24K of bandwidth per call.
C. The default codec does not matter if you have defined a hardware MTP in your Cisco Unified Communications Manager environment.
D. To deploy a Cisco H.323 gatekeeper, you must configure MTP resources on the gatekeeper and only use G.711 between regions.
Answer: C
Q27. Company X has deployed a VCS Control with a local zone and a traversal client zone. To facilitate external calls, VCS Expressway is deployed and traversal server zone is set up there. Video endpoints inside Company X have registered but are unable to receive calls from outside endpoints. Which option could be the cause of this issue?
A. The access control list on the VCS Control must be updated with the IP for the external users.
B. When a traversal zone is set up on VCS Control only outbound calls are possible.
C. The local zone on the VCS Control does not have a search rule configured.
D. The traversal zone on the VCS Control does not have a search rule configured.
Answer: C
Q28. Refer to the exhibit.
Which configuration elements must match for adjacent neighbors to establish a SAF neighbor relationship?
A. the label name specified in the router eigrp command
B. the autonomous-system number specified in the service-family ipv4 autonomous-system command
C. the sf-interface configuration
D. the topology base configurations
E. the label name specified in the router eigrp command and the autonomous-system number
Answer: B
Explanation:
Incorrect Answer: A, C, D, E service-family ipv4 autonomous-system 1 enables a Cisco SAF service family for the specified autonomous system on the router Link:
http://www.cisco.com/en/US/docs/ios/saf/configuration/guide/saf_cg_ps10591_TSD_Products_Configuration_Guide_Chapter.html#wp1056363
Q29. Refer to the exhibit.
The H.323 Gateway is showing status “unknown”. Which statement is true?
A. The gateway must be reset in Cisco Unified Communications Manager.
B. The no gateway command followed by the gateway command must be issued in Cisco IOS.
C. The mgcp commands must be removed.
D. H.323 gateways do not register with Cisco Unified Communications Manager H.323 gateways always show status "Unknown".
E. VUAN 1 20 may be down and so the H.323 gateway appears offline to the Cisco Unified Communications Manager
Answer: D
Explanation:
Incorrect Answer: A, B, C, E
After a gateway is registered with Cisco Unified Communications Manager, gateway registration status may display in Cisco Unified Communications Manager Administration as unknown.
Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b06gtway. html
Q30. This is the configuration on the voice gateway:
telephony-service
max-ephones 30
max-dn 60 preference 0
srst mode auto-provision all
srst dn line-mode dual
srst dn template 3 srst ephone description
srst fallback auto-provision phone
srst ephone template 5
Which ephone-dn would be expected upon activation of SRST?
A. ephone-dn 1 dual-linenumber 7001description 7001name 7001ephone-dn-template 5This DN is learned from srst fallback ephones
B. ephone-dn 1 dual-linenumber 7001description 7001name 7001ephone-dn-template 3This DN is learned from srst fallback ephones
C. ephone-dn 1number 7001description 7001name 7001ephone-dn-template 5This DN is learned from srst fallback ephones
D. ephone-dn 1number 7001description 7001name 7001ephone-dn-template 3This DN is learned from srst fallback ephones
Answer: A