Cisco 300-175 Dumps 2021

NEW QUESTION 1
Which three items are supported operating systems of the Cisco VM-FEX universal passthrough? (Choose three.)

• A. Oracle Solaris 11
• B. Red Hat Enterprise Linux 6.0
• C. Microsoft Windows Server 2003 SP3
• D. Microsoft Windows Server 2008
• E. Ubuntu Server 12.2
• F. SLES 11

Answer: BDF

NEW QUESTION 2
Refer to the exhibit.

You are configuring a Cisco UCS Fabric Interconnect. You associate a blade server to a service profile that has the Testing boot policy. Which statement describes the result of the configuration?

• A. The iSCSI boot was created for the LAN boot policy.
• B. The blade server fails to boot due to a missing configuration line of set order 0.
• C. The blade server first tries to boot by using vHBA3 across the SAN network.
• D. The blade server first tries to boot from the local storage, and if this fails, it boots from vHBA3.

Answer: C

Explanation: Reference:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/2-2/b_UCSM_CLI_Configura

NEW QUESTION 3
Which two items represent the features of Call Home on the Cisco Unified Computing System? (Choose two.)

• A. send fault details to Cisco TAC
• B. SNMP trap receiver
• C. syslog
• D. central repository of normalized fault data
• E. send email alerts to administrators

Answer: AE

NEW QUESTION 4
Which two statements about the maintenance policy configurations available from the Cisco UCS Manager GUI are true? (Choose two.)

• A. A maintenance policy can be defined for the service profile associated to a server and for updating a service profile bound to one or more service profiles.
• B. A maintenance policy is used to configure a nondisruptive upgrade of the Cisco UCS Fabric Interconnects.
• C. A maintenance policy can defer the direct deployment of firmware images for components that use neither the host firmware nor the management firmware packages available in the Cisco UCS Manager, such as fabric interconnects and IOMs.
• D. A maintenance policy can deploy service profile changes immediately, when acknowledged by an admin user or automatically at the time specified in the schedule.
• E. A maintenance policy can be used only to apply nondisruptive service profile changes to servers.

Answer: BD

Explanation: Reference:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/20/b_UCSM_GUI_Configura

NEW QUESTION 5
You plan to implement FCoE on a Cisco UCS -Series server. Which option must you configure from the Cisco Integrated Management Controller GUI?

• A. a vNIC failover
• B. a boot table entry
• C. NIV
• D. FIP mode

Answer: D

Explanation: Reference:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/1-21/b_Cisco_UCS_CSerie
_1/Cisco_UCS_CSeries_Servers_Integrated_Management_Controller_Configuration_Guide_1_2_1_chapter9.ht

NEW QUESTION 6
You have a Cisco FabricPath network. You must implement vPC+ for a downstream switch. Which three actions should you perform? (Choose three.)

• A. Configure the switch ID on the peer switches.
• B. Establish a peer link between the peer switches.
• C. Configure the downstream switch to use PAgP on EtherChannel.
• D. Connect the downstream switch to a 10-Gb port.
• E. Configure the upstream switch to use PAgP on EtherChannel.
• F. Configure a peer keepalive between the peer switches.

Answer: ABC

NEW QUESTION 7
When deploying Nexus 5000 switches in NPV mode, what technology will help with resilience and increase throughput?

• A. F-port-channel trunk
• B. FCoE

Answer: A

Explanation: Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/san_switching/421_n1_1/b_Cisco_n5

NEW QUESTION 8
In which situation would you be required to change a Cisco UCS system from end-host mode to switching mode?

• A. Design requirements call for the use of fabric failover.
• B. Fabric interconnect is connecting to disjoint Layer 2 networks upstream.
• C. HSRP routers are directly connected to the fabric interconnect.
• D. Upstream Cisco Nexus 5000 is configured for vPC.

Answer: C

NEW QUESTION 9
Open the windows by clicking on the minimized at the bottom of the viewing area. Windows can be minimized by clicking on the [X], repositioned by dragging the title bar, and resized by using the handle at the lower right corner to customize the viewing area.
If you are required to access the devices to complete this scenario, the mouse cursor will use a hand symbol when moved over device icons. Clicking the icon will open a device terminal so you can interact with the hardware.
Open the Questions window and begin by clicking a question number. When you have completed answering all questions, click Done to continue.
Scenario
Use your UCS knowledge on Adapter errors ………………………………………configurations.

Current Adapter Connected Status is?

• A. Operable
• B. Down
• C. Inoperable
• D. Unknown

Answer: D

NEW QUESTION 10
When adding a VMware ESXi host to the Distributed Virtual Switch, what are two risks of migrating a VMNIC that is associated to vSwitch 0? (Choose two.)

• A. loss of access to the management IP interface
• B. duplicate IP address error
• C. duplicate MAC address error
• D. loss of VMware ESXi communication with VMware vCenter
• E. DVS port group will not appear in the VM network settings
• F. DVS port group will overwrite the port groups in vSwitch 0

Answer: AD

NEW QUESTION 11
Where would you disable or enable Cisco Discovery Protocol?

• A. LAN connectivity policy
• B. service profile
• C. network control policy
• D. LAN uplinks manager

Answer: C

NEW QUESTION 12
Which two VMware features must be turned off in the data center cluster for Cisco VM-FEX universal passthrough to operate? (Choose two.)

• A. VMCI
• B. DRS
• C. FT
• D. HA
• E. vMotion

Answer: AC

NEW QUESTION 13
You have a Cisco UCS server connected to Cisco Fabric Interconnects. Which two options are characteristics of a virtual machine that is deployed by using VMFEX in high-performance mode in this environment? (Choose two.)

• A. The virtual machine connects to a Cisco VIF on the external switch by using Cisco VN-Link in hardware, bypassing the hypervisor.
• B. The dynamic vNIC can connect redundantly by using hardware-based failover to the Cisco UCS Fabric interconnect cluster.
• C. Dynamic vNICs inherit parameters from static vNICs
• D. The virtual machine can share the same dynamic vNIC with another virtual machine in VMFEX highperformance mode
• E. The virtual machine deployed in VM-FEX high-performance mode runs on the host by using the default BIOS policy that is available in the Cisco UCS Manager

Answer: AB

Explanation: In high-performance mode, traffic to and from a virtual machine (VM) bypasses the DVS and hypervisor. Traffic travels directly between VMs and the virtual interface card (VIC) adapter.
The benefits of high-performance mode are as follows:
-Increases I/O performance and throughput.
-Decreases I/O latency.
-Improves CPU utilization for virualized I/O-intensive applications. You must modify or create several policies in order for VM-FEX for VMware to function optimally:
-VMwarePassThrough Ethernet Adapter Policy (high-performance mode only)
-Dynamic vNIC Connection Policies
-BIOS Policy (high-performance mode only)
-VM Lifecycle Policy
Dynamic vNICs are always protected in Cisco UCS, but this field allows you to select a preferred fabric, if any. You can choose one of the following:
-Protected Pref A—Cisco UCS attempts to use fabric A but fails over to fabric B if necessary
-Protected Pref B—Cisco UCS attempts to use fabric B but fails over to fabric A if necessary Protected—Cisco UCS uses whichever fabric is available
Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/vm_fex/vmware/gui/config_guide/b_GUI_V

NEW QUESTION 14
How many certificates does Cisco Unified Computing System Manager have to export to communicate with VMware vCenter server if the VMware ESXi hosts are all running version 5.0 or higher?

• A. 1
• B. 2
• C. 4
• D. 8
• E. 16

Answer: A

NEW QUESTION 15

Answer:

Explanation:

NEW QUESTION 16
What is the maximum number of ports on a VMware vCenter Distributed Virtual Switch?

• A. 64
• B. 128
• C. 1024
• D. 4096
• E. 8192

Answer: D

NEW QUESTION 17
You need to automate the management of servers, networks, and storage on a Cisco UCS system, by using PowerShell.
Which tool should you use?

• A. Cisco UCS Platform Emulator
• B. Cisco UCS Python SDK
• C. Cisco UCS Automation Tool
• D. Cisco UCS PowerTool Suite

Answer: D

Explanation: Reference:
http://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/microsoft-applications-on-ucs/broch

NEW QUESTION 18
Which four physical connections on a fabric interconnect are needed to perform the initial system setup for a cluster configuration? (Choose four.)

• A. Ethernet uplink ports connected to upstream switch
• B. console port connected to a computer terminal or console server.
• C. Layer 1 ports on both fabric interconnects connected to each other
• D. Layer 1 port of the first fabric interconnect connected to Layer 2 port of the second fabric interconnect
• E. Layer 2 ports on both fabric interconnects connected to each other
• F. Fibre Channel uplink ports connected to upstream fabric switch
• G. management Ethernet port (mgmt0) connected to external switch or router
• H. port channel to each fabric interconnect

Answer: BCEG

NEW QUESTION 19
Which item describes the failure scenario called a "split-brain" in the Cisco Unified Computing System?

• A. failure of the Cisco Unified Computing System L1-L2 network
• B. failure of a Cisco Unified Computing System Chassis Management Controller
• C. failure of a Cisco Unified Computing System I/O module
• D. failure of a Cisco Unified Computing System Fabric Interconnect
• E. failure of a Cisco Unified Computing System Chassis Management Switch

Answer: A

NEW QUESTION 20
Which two are true concerning the role-based access control specifics of a Cisco Unified Computing System? (Choose two.)

• A. Disabled local user accounts are deleted from the database.
• B. A locally authenticated user account is any user account that is authenticated through LDAP, RADIUS, or TACACS+.
• C. If a user maintains a local user account and a remote user account simultaneously, the roles that are defined in the local user account override those that are maintained in the remote user account.
• D. By default, user accounts expire after 90 days; a warning message will be generated 10 days prior to expiration.
• E. A user that is assigned one or more roles will be allowed the privileges that are consistent across all of the assigned roles.
• F. All roles include read access to all configuration settings in the Cisco Unified Computing System domain.

Answer: CF