It is impossible to pass Microsoft 70-417 exam without any help in the short term. Come to Actualtests soon and find the most advanced, correct and guaranteed Microsoft 70-417 practice questions. You will get a surprising result by our Replace Upgrading Your Skills to MCSA Windows Server 2012 practice guides.
2021 Jan 70-417 torrent
Q91. Your network contains an Active Directory domain named contoso.com. The domain contains a Web server named www.contoso.com. The Web server is available on the Internet.
You implement DirectAccess by using the default configuration.
You need to ensure that users never attempt to connect to www.contoso.com by using DirectAccess. The solution must not prevent the users from using DirectAccess to access other resources in contoso.com.
Which settings should you configure in a Group Policy object (GPO)?
A. DirectAccess Client Experience Settings
B. Name Resolution Policy
C. DNS Client
D. Network Connections
Answer: B
Explanation:
http://www.techrepublic.com/blog/10things/10-things-you-should-know-aboutdirectaccess/1371
Q92. Which feature is described below?
You can use the ___ to reduce the number of duplicate blocks of data in storage, you can store much more data in a given amount of storage capacity than was possible in previous releases that used Single Instance
Storage (SIS) or NTFS file system compression.
A. iSCSI Target Server
B. iSCSI Target Boot
C. Multiterabyte Volumes
D. Data Deduplication role service
Answer: D
Explanation:
By using Data Deduplication, general purpose file servers can typically reduce storage capacity utilization by a 2:1 ratio (for example, files that previously used 1 TB would use 500 GB after deduplication). Servers that host virtualization data (such as VHD files) often reduce storage capacity utilization by a 20:1 ratio, which reduces 1 TB of data to 50 GB.
Q93. You have a server named Server1 that has a Server Core installation of Windows Server
2008 R2.
Server1 has the DHCP Server server role and the File Server server role installed.
You need to upgrade Server1 to Windows Server 2012 R2 with the graphical user interface
(GUI).
The solution must meet the following requirements:
. Preserve the server roles and their configurations.
. Minimize administrative effort.
What should you do?
A. On Server1, run setup.exe from the Windows Server 8 installation media and select
Server with a GUI.
B. Start Server1 from the Windows Server 8 installation media and select Server Core
Installation.
When the installation is complete, add the Server Graphical Shell feature.
C. Start Server1 from the Windows Server 8 installation media and select Server with a
GUI.
D. On Server1, run setup.exe from the Windows Server 8 installation media and select
Server Core Installation.
When the installation is complete, add the Server Graphical Shell feature.
Answer: D
Explanation:
A. Server is on 2008 R2 core, must install 2012 core and then GUI B. Not least effort C. Not least effort
D. Upgrade to 2012 and install GUI shell http://technet.microsoft.com/en-us/library/jj574204.aspx Upgrades that switch from a Server Core installation to the Server with a GUI mode of Windows Server 2012 R2 in one step (and vice versa) are not supported. However, after upgrade is complete, Windows Server 2012 R2 allows you to switch freely between Server Core and Server with a GUI modes. For more information about these installation options, how to convert between them, and how to use the new Minimal Server Interface and Features on Demand, see http://technet.microsoft.com/library/hh831786.
Q94. Your network contains an active directory domain named Contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.
You create a group Managed Service Account named gservice1.
You need to configure a service named service1 to run as the gservice1 account.
How should you configure service1?
A. From Services Console configure the recovery settings
B. From a command prompt ,run sc.exe and specify the config parameter
C. From Windows PowerShell,run Set-Service and specify the -PassThrough parameter
D. From a command prompt ,run sc.exe and specify the sdset parameter
Answer: B
Explanation:
Executing the sc.exe command with the config parameter will modify service configuration.
Q95. OTSPOT
You deploy a Server with a GUI installation of Windows Server 2012 R2 Datacenter.
From Windows PowerShell, you run the following command:
Remove-WindowsFeature Server-Gui-Shell.
In the table below, identify which tools are available on Server1 and which tools are
unavailable on Server1.
Make only one selection in each row. Each correct selection is worth one point.
Answer:
Up to the immediate present 70-417 practice:
Q96. Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2.
Client computers run either Windows 7 or Windows 8. All of the client computers have an application named App1 installed.
The domain contains a Group Policy object (GPO) named GPO1 that is applied to all of the client computers.
You need to add a system variable named App1Data to all of the client computers.
Which Group Policy preference should you configure?
A. Ini Files
B. Data Sources
C. Services
D. Environment
Answer: D
Explanation: Environment Variable preference items allow you to create, update, replace, and delete user and system environment variables or semicolon-delimited segments of the PATH variable.
Note: Creating an Environment Variable item To create a new Environment Variable preference item
. Open the.Group Policy Management Console.. Right-click the Group Policy object (GPO) that should contain the new preference item, and then click.Edit.. . In the console tree under.Computer Configuration.or.User Configuration., expand the.Preferences.folder, and then expand the.Windows Settings.folder.
. Right-click the.Environment.node, point to.New., and select.Environment Variable.. . In the.New Environment Variable Properties.dialog box, select an.Action.for Group
Policy to perform. (For more information, see "Actions" in this topic.) . Enter environment variable settings for Group Policy to configure or remove. . Click the.Common.tab, configure any options, and then type your comments in
the.Description.box.
. Click.OK.. The new preference item appears in the details pane.
Reference: Configure an Environment Variable Item
Q97. RAG DROP
Your network contains a single Active Directory domain named contoso.com. The domain contains an Active Directory site named Site1 and an organizational unit (OU) named OU1.
The domain contains a client computer named Client1 that is located in OU1 and Site1.
You create five Group Policy objects (GPO). The GPOs are configured as shown in the following table.
You need to identify in which order the GPOs will be applied to Client1.
In which order should you arrange the listed GPOs?
To answer, move all GPOs from the list of GPOs to the answer area and arrange them in
the correct order.
Answer:
Q98. You have a server named Server1 that runs Windows Server 2012 R2. Server1 is located
in the perimeter network and has the DNS Server server role installed.
Server1 has a zone named contoso.com.
You apply a security template to Server1.
After you apply the template, users report that they can no longer resolve names from
contoso.com.
On Server1, you open DNS Manager as shown in the DNS exhibit. (Click the Exhibit button.)
On Server1, you open Windows Firewall with Advanced Security as shown in the Firewall exhibit. (Click the Exhibit button.)
You need to ensure that users can resolve contoso.com names.
What should you do?
A. From Windows Firewall with Advanced Security, disable the DNS (TCP, Incoming) rule and the DNS (UDP, Incoming) rule.
B. From DNS Manager, modify the Zone Transfers settings of the contoso.com zone.
C. From DNS Manager, unsign the contoso.com zone.
D. From DNS Manager, modify the Start of Authority (SOA) of the contoso.com zone.
E. From Windows Firewall with Advanced Security, modify the profiles of the DNS (TCP,
Incoming) rule and the DNS (UDP, Incoming) rule.
Answer: E
Q99. OTSPOT
You have a Hyper-V host named HYPERV1. HYPERV1 hosts a virtual machine named
DC1.
You need to prevent the clock on DC1 from synchronizing from the clock on HYPERV1.
What should you configure? To answer, select the appropriate object in the answer area.
Answer:
81. Your network contains an Active Directory domain named adatum.com. The domain contains three domain controllers. The domain controllers are configured as shown in the following table.
DC3 loses network connectivity due to a hardware failure. You plan to remove DC3 from the domain.
You log on to DC3.
You need to identify which service location (SRV) records are registered by DC3.
What should you do?
A. Open the %windir%\system32\dns\backup\adatum.com.dns file.
B. Open the %windir%\system32\config\netlogon.dns file.
C. Run ipconfig /displaydns.
D. Run dcdiag /test:dns.
Answer: B
Explanation:
The netlogon.dns file contains all registrations. http://support.microsoft.com/kb/816587/en-us How to verify that SRV DNS records have been created for a domain controller The SRV record is a Domain Name System (DNS) resource record that is used to identify computers that host specific services. SRV resource records are used to locate domain controllers for Active Directory. To verify SRV locator resource records for a domain controller, use one of the following methods. DNS Manager After you install Active Directory on a server running the Microsoft DNS service, you can use the DNS Management Console to verify that the appropriate zones and resource records are created for each DNS zone. Active Directory creates its SRV records in the following folders, where Domain_Name is the name of your domain: Forward Lookup Zones/Domain_Name/_msdcs/dc/_sites/Default-First-Site-Name/_tcp Forward Lookup Zones/Domain_Name/_msdcs/dc/_tcp In these locations, an SRV record should appear for the following services: _kerberos _ldap Netlogon.dns If you are using non-Microsoft DNS servers to support Active Directory, you can verify SRV locator resource records by viewing Netlogon.dns. Netlogon.dns is located in the %systemroot%\System32\Config folder. You can use a text editor, such as Microsoft Notepad, to view this file. The first record in the file is the domain controller's Lightweight Directory Access Protocol (LDAP) SRV record. This record should appear similar to the following: _ldap._tcp.Domain_Name Nslookup Nslookup is a command-line tool that displays information you can use to diagnose Domain Name System (DNS) infrastructure. To use Nslookup to verify the SRV records, follow these steps:
On your DNS, click Start, and then click Run.
In the Open box, type cmd.
Type nslookup, and then press ENTER.
Type set type=all, and then press ENTER.
Type _ldap._tcp.dc._msdcs.Domain_Name, where Domain_Name is the name of your
domain, and then press ENTER.
Nslookup returns one or more SRV service location records
Q100. You have a server named DNS1 that runs Windows Server 2012 R2.
You discover that the DNS resolution is slow when users try to access the company intranet home page by using the URL http://companyhome.
You need to provide single-label name resolution for CompanyHome that is not dependent on the suffix search order.
Which three cmdlets should you run? (Each correct answer presents part of the solution. Choose three.)
A. Add-DnsServerPrimaryZone
B. Add-DnsServerResourceRecordCName
C. Set-DnsServerDsSetting
D. Set-DnsServerGlobalNameZone
E. Set-DnsServerEDns
F. Add-DnsServerDirectory Partition
Answer: A,B,D