Microsoft 70-740 Study Guides 2021

NEW QUESTION 1
Note: This question is part of a series of questions that use the same similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 contains a virtual machine named VM1.
You need to ensure that you can use nested virtualization on VM1. What should you run on Server1?

• A. the Mount-VHD cmdlet
• B. the Diskpart command
• C. the Set-VHD cmdlet
• D. the Set-VM cmdlet
• E. the Set-VMHost cmdlet
• F. the Set-VMProcessor cmdlet
• G. the Install-WindowsFeature cmdlet
• H. the Optimize-VHD cmdlet

Answer: F

NEW QUESTION 2
Note: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Exchange Server 2021 organization.
Some users access the mailbox on their mobile device by using Exchange ActiveSync.
You need to prevent the users from synchronizing more than one month of email or calendar data to their device.
Solution: You deploy an Allow/Block/Quarantine policy. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 3
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. You need to identify which server is the schema master.
Solution: You open Active Directory Users and Computers, right-click contoso.com in the console tree, and then click Operations Master.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation: This solution only shows the domain FSMO roles, not the forest FSMO roles.
References: https://blogs.technet.microsoft.com/mempson/2007/11/08/how-to-find-out-who-has-your-fsmo-roles/

NEW QUESTION 4
You have four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2021. Each server has a single 4-TB SATA hard disk.
To each server you attach a new 4-TB SATA hard disk.
You need to create a new storage cluster that uses Storage Spaces Direct. The storage pool must contain all of the new disks.
Which command should you run before you enable Storage Space Direct?

• A. Add-ClusterSharedVolume –Name “Disk 1” –Cluster Cluster1
• B. New-Cluster –Name Cluster1 –Node ‘Server1’, ‘Server2’, ‘Server3’, ‘Server4’ -NoStorage
• C. Get-ClusterAvailableDisk –Cluster Cluster1 | Add-ClusterDisk
• D. New-ClusterStorageEnclosure –id 1 –name Cluster1 –type jbod –ConnectionString “Server1,Server2,Server3,Server4”

Answer: B

NEW QUESTION 5
You have four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2021.
Server1 and Server2 have the Hyper-V server role installed. Server1 hosts a virtual machine named VM1. Server2 hosts a virtual machine named VM2. Server3 hosts the disks and the configurations of both virtual machines on an SMB share named VMShare.
You use Server4 to manage Hyper-V operations on Server1 and Server2.
From Server4, you attempt to perform a live migration of VM1 and VM2, but you receive the following error message: “No credentials are available in the security package”.
You need to ensure that you can perform the live migration of VM1 and VM2 between Server1 and Server2 while signed in to Server4.
What should you do?

• A. From Active Directory Users and Computers, modify the properties of Server4. Configure the delegation settings to trust the computer for delegation of cifs.
• B. From Windows PowerShell on Server3, run the remove-SMBMultiChannelConstraint cmdlet, and then assign Server4 Full Control permissions to VMShare.
• C. From Active Directory Users and Computers, modify the properties of Server1 and Server2. Configure the Delegation settings to trust the computers for delegation of the Microsoft Virtual System Migration Service.
• D. From Active Directory Users and Computers, modify the properties of your user accoun
• E. Modify the Account is sensitive and cannot be delegated setting.

Answer: C

Explanation: References: https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/deploy/set- up-hosts-for-live-migration-without-failover-clustering

NEW QUESTION 6
Which container type is described below:
Provides application isolation through process and namespace isolation technology.
This container shares a kernel with the container host and all containers running on the host.

• A. Hyper-V Container
• B. Windows Server Container

Answer: B

NEW QUESTION 7
Nano Server is foundational to the modern datacenter and is useful in two core scenarios: As a private cloud infrastructure it's particularly useful for clustered Hyper-V, clustered storage and core networking services scenarios; or as an application platform it's highly optimized for modern distributed and cloud-based apps which leverage containers and micro service architectures.
Is the following statement TRUE or FALSE?
A local interface with UI support is available for offline management of Nano Servers?

• A. TRUE
• B. FALSE

Answer: B

Explanation: A local interface with UI support is NOT available for Nano servers. You must administer them remotely using PowerShell.

NEW QUESTION 8
In this section, you'll see one or more sets of questions with the same scenario and problem Each
question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration

You need to prevent Server1 from resolving queries from DNS clients located on Subnet4 Server1
must resolve queries from all other DNS clients
Solution From a Group Policy object (GPO) in tne domain, you modify the Network List Manager Policies
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 9
HOTSPOT
Your company has a testing environment that contains an Active Directory domain named contoso com The domain contains a server named Server1 that runs Windows Server 2021. Server1 has IP Address Management (IPAM) installed IPAM has the following configuration.

The IPAM Overview page from Server Manager is shown in the IPAM Overview exhibit.

For each of the following statements, select Yes if the statement is true Otherwise, select No

Answer:

Explanation:

NEW QUESTION 10
DRAG DROP
You have a file server named Server1 that runs Windows Server 2021.
You need to create a report that lists all of the share permissions assigned to the security principals on Server1.
How should you complete the command? To answer, drag the appropriate cmdlets to the correct targets. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

Answer:

Explanation:

NEW QUESTION 11
You have a Nano Server named Nano1.
Which cmdlet should you use to identify whether the DNS Server role is installed on Nano1?

• A. Find-NanoServerPackage
• B. Get-Package
• C. Find-Package
• D. Get-WindowsOptionalFeature

Answer: B

NEW QUESTION 12
Note This question is part of a series of questions that use the same scenario. For your convenience,
the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of Repeated Scenario:
A company named Contoso, ltd. has several servers that run Windows Server 2021 Contoso has a Hyper V environment that uses failover clustering and Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines.
The WSUS deployment contains one upstream server that is located on the company's perimeter network and several downstream servers located on the internal network, A firewall separates the upstream server from the downstream servers.
You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume.
The CIO of Contoso identifies the following requirements for the company's IT department:
• Deploy failover cluster to two new virtual machines.
• Store all application databases by using Encrypted File System (EFS).
• Ensure that each Windows container has a dedicated IP address assigned by a DHCP server
• Produce a report that lists the processor time used by all of the processes on a server named Server 1 for five hour.
Encrypt all communication between the internal network and the perimeter network, including all WSUS communications.
• Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent.
End of Repeated Scenario.
You need to modify the Hyper V cluster to meet the load balancing requirement for the virtual machine. Which command should you run?

• A. (Get-ClusterParameter) AutoBalanecrMode=2
• B. (Get-Cluster).AutoBalanecrMode=2
• C. (Get-ClusterParameter).AutoBalancerLevel=2
• D. (Get-Cluster).AutoBalancerLevel=2

Answer: D

NEW QUESTION 13
HOTSPOT
You have four Hyper-V hosts named Server1, Server2, Server3 and Server4 that run Windows Server 2021. The hosts are nodes in a failover cluster.
A virtual machine named VM1 is running in the failover cluster. The role for VM1 is configured as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the
information presented in the graphic.

Answer:

Explanation:
References:
https://msdn.microsoft.com/en-us/library/aa369665(v=vs.85).aspx

NEW QUESTION 14
HOTSPOT
Your network contains an Active Directory forest. The forest contains one domain named contoso.com. The domain contains two domain controllers named DC1 and DC2. DC1 holds all of the operations master roles.
During normal network operations, you run the following commands on DC2:

DC1 fails.
You remove DC1 from the network, and then you run the following command:

For each of the following statements, select Yes if the statement if true. Otherwise, select No.

Answer:

Explanation:

NEW QUESTION 15
You have Nano Setver image named Diskl .vhdx. You mount Diskl .vhdx.
You need to add a folder that contains several files to the image. Which tool or cmdlet you should use?

• A. Copy-Item
• B. Add-WindowsImage
• C. Add-WindowsPackage
• D. Edit-NanoServerImage

Answer: A

NEW QUESTION 16
Note: This question is part of a series of questions that use the same similar answer choices. An
answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have an Active Directory domain that contains two Hyper-V servers named Server1 and Server2. Server1 has Windows Server 2021 installed. Server2 has Windows Server 2012 R2 installed.
Each Hyper-V server has three network cards. Each network card is connected to a different subnet. Server1 contains a dedicated migration network.
Server2 contains a virtual machine named VM5.
You plan to perform a live migration of VM5 to Server1.
You need to ensure that Server1 uses all available networks to perform the live migration of VM5. What should you run1?

• A. the Mount-VHD cmdlet
• B. the Diskpart command
• C. the Set-VHD cmdlet
• D. the Set-VM cmdlet
• E. the Set-VMHost cmdlet
• F. the Set-VMProcessor cmdlet
• G. the Install-WindowsFeature cmdlet
• H. the Optimize-VHD cmdlet

Answer: E

NEW QUESTION 17
DRAG DROP
You have a server named Server1 that runs Windows Server 2021. Server1 has the Hyper-V server role installed and hosts a virtual machine named VM1.
Server1 has an NVMe storage device. Currently, the device is assigned to VM1 through a Discrete Device Assignment.
You need to make the storage device available to Server1.
Which four actions should you perform in sequence? To answer, move the appropriate actions from
the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation: If you want to return the device back to its original state, you will need to stop the VM and issue the
following cmdlets:
Remove-VMAssignableDevice Mount-VMHostAssignableDevice
You can then re-enable the device in device manager.
References: https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/deploy/deploying-storage-devices-using-dda#removing-a-device-and-returning-it-to-the-host

NEW QUESTION 18
NOTE: This Question is a part of a series of questions that use the same or similar answer choices. An
answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have two- node Hyper-V cluster named Cluster1. A virtual machine named VM1 runs on Cluster1.
You need to configure monitoring of VM1. The solution must move VM1 to a different node if the Print Spooler service on VM1 stops unexpectedly.
Which tool should you use?

• A. the clussvc.exe command
• B. the cluster.exe command
• C. the computer Management snap-in
• D. the configurehyper.exe command
• E. the Disk Management snap-in
• F. the Failover Cluster Manager snap-in
• G. the Hyper-V Manager snap-in
• H. the Server Manager app

Answer: F