We offers 70-740 exam. "Installation, Storage, and Compute with Windows Server 2021", also known as 70-740 exam, is a Microsoft Certification. This set of posts, Passing the 70-740 exam with 70-740 dumps, will help you answer those questions. The 70-740 exam covers all the knowledge points of the real exam. 100% real 70-740 dumps and revised by experts!

Check 70-740 free dumps before getting the full version:

NEW QUESTION 1
HOTSPOT
You have a server named Server1 that runs Windows Server 2021 Server1 has the Web Application Proxy role service installed
You publish an application named App1 by using the Web Application Proxy.
You need to change the URL that users use to connect to App1 when they work remotely. Which command should you run? To answer, select the appropriate options in the answer area
70-740 dumps exhibit

    Answer:

    Explanation: 70-740 dumps exhibit

    NEW QUESTION 2
    Note: This question is part of a series of questions that present the same scenario. Each question in
    the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
    After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
    You have two servers that run Windows Server 2021.
    You plan to create a Network load Balancing (NLB) cluster that will contain both servers. You need to configure the network cards on the servers for the planned NLB configuration.
    Solution: You configure the network cards to be on the same subnet and to have dynamic IP addresses. You configure the cluster to use multicast.
    Does this meet the goal?

    • A. Yes
    • B. No

    Answer: B

    Explanation:
    References:
    https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/network-load- balancing

    NEW QUESTION 3
    Your network contains an Active Directory forest named contoso com The forest contains a member server named Server1 that runs Windows Server 2021 Server1 is located in the perimeter network You install the Active Directory Federation Services server role on Server1. You create an Active Directory Federation Services (ADFS) farm by using a certificate that has a subject name of sts.contoso com
    You need to enable certificate authentication from the Internet on Server1
    Which two inbound TCP ports should you open on the firewall? Each correct answer presents part of the solution

    • A. 389
    • B. 443
    • C. 3389
    • D. 8531
    • E. 49443

    Answer: BE

    NEW QUESTION 4
    You have a Windows Server 2021 failover cluster 1 that contains four nodes named Server1, Server2, Server3, Server4, Cluster1 hosts 40 virtual machines that are distributed evenly across the nodes. Server1 and Server2 are located in a data center in Madrid. Server3 and Server4 are located in a data center in Barcelona.
    You need to ensure that when you pause a node in the other data center.
    Which two actions should you perform? Each correct answer present part of the solution.

    • A. Run the New-Cluster Fault Domain cmdlet.
    • B. Run the Add-Cluster Group cmdlet.
    • C. Configure a file share witness for each data center.
    • D. Run the Set-Cluster Fault Domain cmdlet.
    • E. Create an Active Directory site for each data center.
    • F. Change the quorum configuration of the cluster to Node Majority.

    Answer: BD

    NEW QUESTION 5
    You deploy two servers that run Windows Server 2021. You install the Failover Clustering feature on both servers. You need to create a workgroup cluster.
    What should you do?

    • A. Configure both of the server to be in a workgroup named Workgrou
    • B. Configure the Cluster Service to log on as Network Servic
    • C. Run the New-Cluster cmdlet and specify an administrative access point of None.
    • D. Create matching local administrative accounts on both of the server
    • E. Assign the same primary DNS suffix to both of the server
    • F. Run the New-Cluster cmdlet and specify an administrative access point of DNS.
    • G. Configure both of the server to be in a workgroup named Workgrou
    • H. Configure the Cluster Service to log on as Network Servic
    • I. Run the New-Cluster cmdlet and specify an administrative access point of DNS.
    • J. Create matching local administrative accounts on both of the server
    • K. Assign the same primary DNS suffix to both of the server
    • L. Run the New-Cluster cmdlet and specify an administrative access point of None

    Answer: B

    Explanation: References:
    https://rlevchenko.com/2015/09/07/workgroup-and-multi-domain-clusters-in-windows-server- 2021/

    NEW QUESTION 6
    You have a server named Server1.
    You enable BitLocker Drive Encryption (BitLocker) on Server1.
    You need to change the password for the Trusted Platform Module (TPM) chip. What should you run on Server1?

    • A. Initialize-Tpm
    • B. Import-TpmOwnerAuth
    • C. repair-bde.exe
    • D. bdehdcfg-exe

    Answer: B

    NEW QUESTION 7
    You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2021. Server1 hosts a virtual machine named VM1 that is in a Running state.
    On Server1, you export VM1 and then you import VM1 on Server2. What is the current state of VM1 on Server2?

    • A. Paused
    • B. Off
    • C. Saved
    • D. Running

    Answer: C

    Explanation: References: https://blog.workinghardinit.work/2021/06/16/live-export-a-running-virtual-machine-or-a-checkpoint/

    NEW QUESTION 8
    You need to create highly available storage spaces that connect to directly attached storage on the hosts Which cmdlet should you use?

    • A. Enable-ClusterStorageSpacesDiret
    • B. Set-StoragePool
    • C. Add-ClusterDisk
    • D. Update-ClusterVirtualMachineConfiguration

    Answer: A

    NEW QUESTION 9
    DRAG DROP
    Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
    Your network contains an Active Directory domain named contoso.com. The functional level of the forest and the domain is Windows Server 2008 R2. All servers in the domain run Windows Server 2021 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.
    The domain contains nine servers that are configured as shown in the following table.
    70-740 dumps exhibit
    The virtual machines are configured as follows:
    - Each virtual machine has one virtual network adapter.
    - VM1 and VM2 are part of a Network Load Balancing (NLB) cluster.
    - All of the servers on the network can communicate with all of the virtual machines.
    You need to install the correct edition of Windows Server 2021 to support the planned changes for Server2, Server3, Server4, and Server5.
    Which edition or editions should you choose for each server? To answer, drag the appropriate editions to the correct servers. Each edition may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
    70-740 dumps exhibit

      Answer:

      Explanation: 70-740 dumps exhibit

      NEW QUESTION 10
      You have a server named Served that runs Windows Server 2021. Server1 will be used as a VPN
      server. You need to configure Server1 to support VPN Reconnect. Which VPN protocol should you use?

      • A. PPTP
      • B. L2TP
      • C. SSTP
      • D. lKEv2

      Answer: D

      NEW QUESTION 11
      Note: This question is part of a series of questions that present the same scenario. Each question in
      the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.
      You have a server named Server1 that runs Windows Server 2021. Server1 hosts a line-of-business application named App1. App1 has a memory leak that occasionally causes the application to consume an excessive amount of memory.
      You need to log an event in the Application event log whenever App1 consume more than 4 GB of memory.
      Solution: You create a performance counter data collector. Does this meet the goal?

      • A. Yes
      • B. No

      Answer: B

      NEW QUESTION 12
      HOTSPOT
      You have four Hyper-V hosts named Server1, Server2, Server3 and Server4 that run Windows Server 2021. The hosts are nodes in a failover cluster.
      The failover cluster is configured to balance virtual machines when a node is more than 80 percent loaded.
      You need to configure the failover cluster to balance the virtual machines when the load of a node is more than five percent higher than the average for the nodes.
      Which command should you run? To answer, select the appropriate options in the answer area.
      70-740 dumps exhibit

        Answer:

        Explanation: 70-740 dumps exhibit

        NEW QUESTION 13
        Note This question is part of a series of questions that use the same scenario. For your convenience,
        the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
        Start of Repeated Scenario:
        Your network contains an Active Directory domain named contoso.com The functional level of the forest and the domain is Windows Server 2008 R2 All servers in the domain run Windows Server 2021 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.
        The domain contains nine servers that are configured as shown in the following table.
        70-740 dumps exhibit
        The virtual machines are configured as follows:
        • E ach virtual machine has one virtual network adapter
        • VM1 and VM2 are part of a Network Load Balancing (NIB) cluster.
        • All of the servers on the network can communicate with all of the virtual machines. End of repeated Scenario.
        You need to minimize the likelihood that a virtual machine running malicious code will consume excessive resources on Server5.
        What should you do?

        • A. Configure the virtual machines as shielded virtual machines.
        • B. Run the Set-VMProcessor cmdlet and specify the –EnableHostResourceProtection Parameter.
        • C. Run the Set-VMProcessor cmdlet and specify the –MaximumCountPerNumaNode Parameter.
        • D. Configure VM Network Adapter Isolation.

        Answer: B

        NEW QUESTION 14
        You have three Hyper-V hosts named Server1, Server2, and Server3 that run Windows Server 2021. The servers are nodes in a failover cluster.
        The failover cluster contains two virtual machines named VM1 and VM2. The roles for VM1 and VM2 have the following configurations.
        70-740 dumps exhibit
        All of the nodes in the failover cluster have sufficient resources to run VM1 and VM2 concurrently. VM1 and VM2 fail over to Server3.
        What is the state of each virtual machine after the failover?

        • A. Both VM1 and VM2 are stopped.
        • B. Both VM1 and VM2are running.
        • C. VM1 is stopped and VM2 is running.
        • D. VM1 is stopped and VM2 is paused.

        Answer: C

        Explanation: References:
        https://msdn.microsoft.com/en-us/library/jj151956(v=vs.85).aspx

        NEW QUESTION 15
        DRAG DROP
        Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2021.
        Server1 allows inbound connectivity from all computers in the contoso.com domain. Server1 has an IP address of 192.168.0.10.
        Server1 hosts a Windows container named Container1. Container1 hosts a website that is accessible on port 80.
        You need to ensure that you can use the Docker client to manage Container1 from any computer in the domain.
        Which three cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.
        70-740 dumps exhibit

          Answer:

          Explanation: References:
          https://glennsarti.github.io/blog/getting-started-with-windows-containers/ https://docs.microsoft.com/en-us/virtualization/windowscontainers/manage-containers/container-networking

          NEW QUESTION 16
          You have a server named Server1 that runs Windows Server 2021 You install the Docker daemon on
          Server1 You need to configure the Docker daemon to accept connections only on TCP port 64500. What should you do?

          • A. Run theNew-NetFirewallRulecmdlet
          • B. Run theSet-ServiceWindows PowerShell cmdlet.
          • C. Edit the daemon.json file.
          • D. Edit the configuration json file

          Answer: C

          NEW QUESTION 17
          HOTSPOT
          Your network contains an Active Directory forest named contoso.com. You need to add a new domain named fabrikam.com to the forest.
          What command should you run? To answer, select the appropriate options in the answer area.
          70-740 dumps exhibit

            Answer:

            Explanation: 70-740 dumps exhibitExplanation:
            References:
            https://technet.microsoft.com/en-us/library/hh974722(v=wps.630).aspx

            NEW QUESTION 18
            Your network contains three Hyper-V hosts. You add all of the hosts to a cluster.
            You need to create highly available storage spaces that connect to directly attached storage on the hosts.
            Which cmdlet should you use?

            • A. Enable-CluslerStorageSpacesDircct
            • B. Update-CluslerVirtualMachineConfiguration
            • C. Add-CluslerDisk
            • D. Set-Storage Pool

            Answer: A

            Recommend!! Get the Full 70-740 dumps in VCE and PDF From Surepassexam, Welcome to Download: https://www.surepassexam.com/70-740-exam-dumps.html (New 296 Q&As Version)