100% Guarantee 70-740 Dumps Questions 2021

NEW QUESTION 1
Your network contains an Active Directory domain. The domain contains two Hyper-V hosts. You plan to perform live migrations between the hosts.
You need to ensure that the live migration traffic is authenticated by using Kerberos. What should you do first?

• A. From Server Manager, install the Host Guardian Service server role on a domain controller.
• B. From Active Directory Users and Computers, add the computer accounts for both servers to the Cryptographic Operators group.
• C. From Active Directory Users and Computers, modify the Delegation properties of the computer accounts for both servers.
• D. From Server Manager, install the Host Guardian Service server role on both servers.

Answer: C

Explanation: If you have decided to use Kerberos to authenticate live migration traffic, configure constrained delegation before you proceed to the rest of the steps.
To configure constrained delegation

NEW QUESTION 2
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 host a virtual
machine named VM1. VM1 has the following settings: Nested virtualization is enabled.
Dynamic Memory is disabled. VM1 is currently running.
You need to adjust the amount of memory assigned to VM1 as quickly as possible. What should you do first?

• A. Change the memory buffer setting of VM1.
• B. Pause VM1.
• C. Shut down VM1.
• D. Enable Dynamic Memory for VM1.

Answer: D

NEW QUESTION 3
You have a server named Server1 that runs Windows Server 2021. Server1 has two network adapters that support single root I/O virtualization (SR-IOV). The network adapters are from two different vendors.
You plan to install the Hyper-V server role on Server1, and then to create a virtual machine named VM1 that runs Windows Server 2021. VM1 will use SR-IOV.
You need to ensure that VM1 can use both network adapters for load balancing and failover. What should you do?

• A. On Server1, create two virtual switches without embedded teamin
• B. On VM1, create one NIC team.
• C. On Server1, create one virtual switch without embedded teamin
• D. On VM1, create one NIC team.
• E. On Server1, create one NIC tea
• F. On VM1, create one NIC team.
• G. On Server1, create one virtual switch that has embedded teamin
• H. On VM1, create two NIC teams.

Answer: A

NEW QUESTION 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com.
You need to create a Nano Server image named Nano1 that will be used as a virtualization host. The Windows Server 2021 source files are located in drive D.
Solution: You run the following cmdlet.

Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 5
Note: This question is part of a series of questions that use the same similar answer choices An
answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
You have a Hyper-V host named Server1 that runs Windows Server 2021 Server1 has a virtual machine named VM1 that uses a single VHDX file VM1 is configured shown in the following table

You plan to use VM1 as a virtual Machine Template to deploy shielded virtual machines You need to ensure that VM1 can be used to deploy shielded virtual machines What should you run?

• A. the Mount-VHD cmdlet
• B. the Diskpart command
• C. the Set-VHD cmdlet
• D. the Set-VM cmdlet
• E. the Set-VMHost cmdlet
• F. the Set-VMProcessor cmdlet
• G. the Install-WindowsFeature cmdlet
• H. the Optimize-VHD cmdlet

Answer: B

NEW QUESTION 6
DRAG DROP
You have a server named Server1 that runs Windows Server 2021. On Server1, you create a Nano Server image named Disk1.vhdx. You need to start Server1 by using Disk1.vhdx.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:

NEW QUESTION 7
Your company has 10 offices. Each office has a local network that contains several Hyper-V hosts that run Windows Server 2021. All of the offices are connected by high speed, low latency WAN links.
You need to ensure that you can use QoS policies for Live Migration traffic between the offices. Which component should you install?

• A. the Multipath I/O feature
• B. the Routing role service
• C. the Network Controller server role
• D. the Canary Network Diagnostics feature
• E. the Data Center Bridging feature

Answer: CE

NEW QUESTION 8
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of repeated scenario
Your network contains an Active Directory domain named contoso.com. The functional level of the forest and the domain is Windows Server 2008 R2. All servers in the domain run Windows Server 2021 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.
The domain contains nine servers that are configured as shown in the following table.

The virtual machines are configured as follows:
• Each virtual machine has one virtual network adapter.
• VM1 and VM2 are part of a Network Load Balancing (NLB) cluster.
• All of the servers on the network can communicate with all of the virtual machines. End of repeated scenario.
You create a new NLB cluster that contains VM3.
You need to ensure that VM2 can remain in the original cluster and be added to the new cluster. What should you do first?

• A. Add a new virtual network adapter to VM2.
• B. Install the Web Application Proxy server role on VM2 and VM3.
• C. Modify the default port rule.
• D. Change the cluster operation mode.

Answer: A

NEW QUESTION 9
Note: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are a server administrator at a company named Contoso, Ltd.
Contoso has a Windows Server 2021 Hyper-V environment configured as shown in the following table.

All of the virtual switches are of the external type.
You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network.
Solution: You implement a Hyper-V Replica between Host2 and Host4. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 10
You have a container host named Server1 that runs Windows Server 2021.
You need to start a Hyper-V container on Server1.
Which parameter should you use with the docker run command?

• A. --runtime
• B. --entrypoint
• C. --privileged
• D. --isolation
• E. --expose

Answer: D

Explanation:
https://docs.microsoft.com/en-us/virtualization/windowscontainers/deploy-containers/system- requirements

NEW QUESTION 11
HOTSPOT
You have a server named Server1 that runs Windows Server 2021. You create a storage pool named Pool1. Pool1 contains three disks.
You need to create a two-way mirror storage space from the disks in Pool1.
Which command should you run? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

Answer:

Explanation: References: https://charbelnemnom.com/2014/09/step-by-step-how-to-create-a-two-way-mirrored-storage-space-via-powershell-storagespaces-powershell/

NEW QUESTION 12
Your network contains an Active Directory domain. The domain contains a new file server named
Server1 that runs a Server Core installation of Windows Server 2021.
Server1 has an ReFS-formatted volume D: and NTFS-formatted volume E: The volumes do not contain any data.
You install the Data Deduplication role service on Server1.
You need to implement Data Deduplication for volumes on D: and E:.
Solution: From Windows PowerShell, you run Format-Volume E: -FileSystem ReFS and Enable- DeDupVolume -Volume D:,E:.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

Explanation:
References: https://docs.microsoft.com/en-us/windows-server/storage/data- deduplication/understand

NEW QUESTION 13
Your network contains an Active Directory domain. The domain contains a new file server named
Server1 that runs a Server Core installation of Windows Server 2021.
Server1 has an ReFS-formatted volume D: and NTFS-formatted volume E: The volumes do not contain any data.
You install the Data Deduplication role service on Server1.
You need to implement Data Deduplication for volumes on D: and E:.
Solution: From Windows PowerShell, you run Format-Volume D: -FileSystem EXFat and Enable- DeDupVolume -Volume D:,E:.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 14
You have a server named Server1 that runs Windows Server 2021. The Docker daemon runs on Server1.
You need to ensure that members of a security group named Docker Administrators can administer Docker.
What should you do?

• A. Run the sc privsc ommand.
• B. Edit the Daemon.json file.
• C. Add Docker Administrators to the local Administrators group.
• D. Edit the Configuration.json file.

Answer: C

NEW QUESTION 15
DRAG DROP
Your network contains an Active Directory domain named contoso.com. The domain has two clusters named FC1 and FC2.
The domain contains servers that run Windows Server 2021. The Servers are configured as shown in the following table.

Server1 hosts a highly available virtual machine named VM1.
You need to move VM1 from Server1 to Server3 by using live migration.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation: References: http://www.checkyourlogs.net/?p=16401

NEW QUESTION 16
You have an application named App1 App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment You need to ensure that the traffic is distributed evenly among the virtual machines that host App1 What should you include in the environment?

• A. Network Controller and Windows Server Network Load Balancing (NLB) nodes
• B. Network Controller and Windows Server Software Load Balancing (SLB) nodes
• C. an RAS Gateway and Windows Server Network Load Balancing (NLB) nodes
• D. an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes

Answer: D

NEW QUESTION 17
You have Nano Server image named Diskl.vhdx. You mount Diskl.vhdx.
You need to add a folder that contains several files to the image. Which tool or cmdlet you should use?

• A. File Explore.
• B. Add-Windows Image
• C. Nano Server Image Builder
• D. Dism

Answer: D

NEW QUESTION 18
DRAG DROP
You have a server named Server1 that runs Windows Server 2021.
On Server1 you use the Basic template to create a new Data Collector Set named CollectorSet1.
You need to configure data collection for the performance counters. The configuration must support the following requirements:
Data collection must run on a schedule.
Data collection must stop if there is less than 1 GB of free disk space.
What should you modify to meet each requirement? To answer, drag the appropriate settings to the correct requirements. Each setting may be used once, more than once, or nor at all. You may need to drag the Split bar between panes or scroll to view content.

Answer:

Explanation: