Act now and download your HUAWEI H12-211 test today! Do not waste time for the worthless HUAWEI H12-211 tutorials. Download Renovate HUAWEI Huawei Certified Datacom Associate-Huawei Networking Technology and Device (HCDA-HNTD) exam with real questions and answers and begin to learn HUAWEI H12-211 with a classic professional.
2021 Oct H12-211 free practice test
Q321. (Topic 4)
The correct statement about the system is autonomous
A. Autonomous System routing protocol is running the same region
B. autonomy within the system can run one or more IGP
C. Autonomous System is a set of regulatory bodies in the same set of routers under the control of
D. BGP autonomous systems such as the use of external gateway routing protocols exchange routing information
Answer: B,C,D
Q322. (Topic 2)
The following exchange on the Ethernet switch in the narrative, which is correct
A. Store and Forward method does not detect the frame error
B. Cut-through mode, the switch receives a frame of 64 bytes before forwarding the frame began
C. Fragment-free way to detect frame errors in the first 64 bytes
D. Store and forward discards the total length of less than 64 bytes of the frame
Answer: C,D
Q323. (Topic 4)
Identifies the cost of routing out the route to reach the destination address within the meaning of the cost, to select the best path, which of the following factors will generally affect the cost value of route
A. line delay, bandwidth
B. Line share
C. Line credibility
D. hops
Answer: A,B,C,D
Q324. (Topic 4)
Router A is configured as follows: [RTA] aaa [RTA-aaa] local-user huawei password simple quidway [RTA-aaa] local-user huawei service-type ppp [RTA] interface Serial 0 [RTA-Serial0] link-protocol ppp [RTA-Serial0] ppp authentication-mode pap [RTA-Serial0] ip address 10.1.1.1 30
Router B is configured as follows: [RTB] interface Serial 0 [RTB-Serial0] link-protocol ppp [RTB-Serial0] ppp pap local-user huawei password simple hello [RTB-Serial0] ip address 10.1.1.2 30 When two routers connected to Serial 0, the two routers can connect to the remote
A. True
B. False
Answer: B
Q325. (Topic 4)
Static routing configuration commands specify the parameters reject ().
A. unreachable routes
B. Black Hole Routing
C. routing loops
D. Iterative routing
Answer: A
Most recent H12-211 simulations:
Q326. (Topic 4)
The following statement is true about RIP routing is
A. You can configure RIP routing on a router, static routes precedence
B. RIP routing protocol into another routing discovery route if you do not specify a cost, the cost of a default route
C. You can configure RIP routing on a router priority on the direct routes
D. RIP routing priority cannot be manually configured
Answer: A,B
Q327. (Topic 4)
ATM protocol framework is divided into three basic planes, respectively,
A. User Plane
B. Control Plane
C. Management Plane
D. fit plane
Answer: A,B,C
Q328. (Topic 2)
Planning a class C network, the network needs to be divided into nine sub, up to 16 hosts per subnet, which is the appropriate subnet mask for the following
A. 255.255.224.0
B. 255.255.255.224
C. 255.255.255.240
D. No appropriate subnet mask
Answer: D
Q329. (Topic 4)
in the different exchange routing information between autonomous systems, routing policy and route filtering controls inter-domain routing information in the self-propagation, this routing protocol is ().
A. IGP
B. BGP
C. EGP
D. IBGP
Answer: C
Q330. (Topic 1)
The switch access port ethernet0 / 1 by adding VLAN 4, can be configured as follows ().
A. [Switch] vlan 4 [Switch-vlan4] port ethernet 0 / 1
B. [Switch] vlan 4 [Switch-Ethernet0 / 1] port access vlan 4
C. [Switch] vlan 4 [Switch-vlan4] port access ethernet 0 / 1
D. [Switch] vlan 4 [Switch-Ethernet0 / 1] port access vlan pvid 4
Answer: A,B