Want to know Actualtests JN0-533 Exam practice test features? Want to lear more about Juniper FWV, Specialist (JNCIS-FWV) certification experience? Study Realistic Juniper JN0-533 answers to Most up-to-date JN0-533 questions at Actualtests. Gat a success with an absolute guarantee to pass Juniper JN0-533 (FWV, Specialist (JNCIS-FWV)) test on your first attempt.

2021 Nov JN0-533 exam price

Q21. -- Exhibit -- 

ns5gt-> get int eth2 

Interface ethernet2: 

description ethernet2 number 8, if_info 704, if_index 0, mode route link up, phy-link up/full-duplex status change:7, last change:09/26/2012 23:08:22 vsys Root, zone Untrust, vr trust-vr dhcp client disabled PPPoE disabled admin mtu 0, operating mtu 1500, default mtu 1500 *ip 171.211.111.111/30 mac 0014.f693.edc8 *manage ip 171.211.111.111, mac 0014.f693.edc8 route-deny disable pmtu-v4 disabled ping disabled, telnet enabled, SSH disabled, SNMP disabled web enabled, ident-reset disabled, SSL disabled DNS Proxy disabled, webauth disabled, g-arp enabled, webauth-ip 0.0.0.0 

Referring to the exhibit, what is the problem?OSPF disabled BGP disabled  RIP disabled  RIPng 

disabled mtrace disabled 

PIM: not configured IGMP not configured 

MLD not configured 

NHRP disabled 

bandwidth: physical 100000kbps, configured egress [gbw 0kbps mbw 0kbps] 

configured ingress mbw 0kbps, current bw 0kbps 

total allocated gbw 0kbps 

DHCP-Relay disabled at interface level 

DHCP-server disabled -- Exhibit -- 

You are the administrator of a NetScreen 5GT. For troubleshooting purposes, you must be able to ping untrusted interfaces. 

Referring to the exhibit, how do you enable ping for interface eth2? 

A. ns5gt-> unset int eth2 manage-ip ping 

B. ns5gt-> set int eth2 manage ping 

C. ns5gt-> enable int eth2 manage ping 

D. ns5gt-> set int eth2 manage-ip ping 

Answer: B 


Q22. On a ScreenOS device, which word appears at the beginning of configuration commands? 

A. set 

B. configure 

C. enable 

D. commit 

Answer: D 


Q23. You want to copy an external configuration file to your ScreenOS device and have it become active only after the device reboots. How would you accomplish this goal? 

A. From the device, copy the configuration from an external TFTP server to the device's flash memory. 

B. From the device, copy the configuration from an external TFTP server to the device's RAM. 

C. From the device, copy the configuration from an external TFTP server and merge it with the current configuration. 

D. From the device, copy the configuration from the device's flash memory to an external TFTP server. 

Answer: A 


Q24. Which action does a ScreenOS device perform first when processing a packet? 

A. It checks for an existing session. 

B. It checks for attacks in the payload. 

C. It performs a route lookup. 

D. It performs a policy lookup. 

Answer: A 


Q25. Which two protocols are used for NSRP IP tracking? (Choose two.) 

A. ARP 

B. TCP 

C. UDP 

D. ICMP 

Answer: A,D 


Updated JN0-533 braindumps:

Q26. You have the following BGP configuration in place to establish a session with a remote peer  over your ethernet4 interface. 

set vrouter trust-vr protocol bgp 65000 

set vrouter trust-vr protocol bgp enable 

set vrouter trust-vr protocol bgp neighbor  remote-as 65500 

set vrouter trust-vr protocol bgp neighbor  enable 

Which additional statement is necessary to establish the session? 

A. set interface protocol bgp enable 

B. set interface ethernet4 bgp enable 

C. set vrouter trust-vr protocol bgp interface ethernet4 

D. set interface ethernet4 protocol bgp 

Answer: D 


Q27. Click the Exhibit button. 

You are setting up security policies to allow access to the servers on the 1.1.1.0/24 subnet. 

Referring to the exhibit, which two host addresses will be able to access the Web servers using FTP? (Choose two.) 

A. 10.1.3.5 

B. 10.1.2.1 

C. 10.1.2.13 

D. 10.1.1.1 

Answer: A,C 


Q28. Your ScreenOS device does not have a static IP address. You want to be able to access it using its FQDN. How would you implement this task? 

A. Configure a domain in DNS. 

B. Configure syslog. 

C. Configure SNMP. 

D. Configure DDNS. 

Answer: D 


Q29. Which two statements are true about NAT? (Choose two.) 

A. Managed IP is one-to-one address mapping for bidirectional access. 

B. Mapped IP is one-to-one address mapping for bidirectional access. 

C. Dynamic IP is the public address that can be used for external access to your Web server. 

D. Dynamic IP is the public address that internal users can use to access the Internet. 

Answer: B,D 


Q30. Which two statements are true about policy-based VPNs as compared to route-based IPsec VPNs when using ScreenOS devices? (Choose two.) 

A. For policy-based IPsec VPNs, you can configure 0.0.0.0/0 as the proxy ID on both VPN gateways regardless of the security policy. 

B. For route-based IPsec VPNs, you can configure 0.0.0.0/0 as the proxy ID on both VPN gateways regardless of the security policy. 

C. For route-based IPsec VPNs, the proxy ID is derived from the policy. 

D. For policy-based IPsec VPNs, the proxy ID is derived from the policy. 

Answer: B,D