The Up To The Minute Guide To UiPath-ADAv1 Braindump

NEW QUESTION 1
Where is the TransactionNumber incremented in the REFramework?

• A. Only in the SetTransactionStatus.xaml workflow.
• B. In the End Process state in the Finally section of the Try Catch activity.
• C. In the RetryCurrentTransaction.xaml workflow and in the SetTransactionStatus.xaml workflow.
• D. In the New Transaction transition.

Answer: C

Explanation:
The TransactionNumber is a variable that stores the index of the current transaction item in the REFramework. The TransactionNumber is incremented in two places in the REFramework:
✑ In the RetryCurrentTransaction.xaml workflow, which is invoked when a system
exception occurs and the retry mechanism is enabled. The workflow increments the TransactionNumber by 1 and sets the TransactionStatus to “Retry”. This allows the framework to retry the same transaction item with a new index. (UiPath ReFramework documentation2)
✑ In the SetTransactionStatus.xaml workflow, which is invoked at the end of each
transaction to update the status of the transaction item and log the result. The
workflow increments the TransactionNumber by 1 and sets the TransactionStatus to “Successful”, “Failed”, or “BusinessRuleException” depending on the outcome of the transaction. This allows the framework to move on to the next transaction item with a new index. (UiPath ReFramework documentation3)
References:
✑ 1: Robotic Enterprise Framework Template - UiPath Studio.
✑ 2: RetryCurrentTransaction.xaml - UiPath ReFramework.
✑ 3: SetTransactionStatus.xaml - UiPath ReFramework.

NEW QUESTION 2
A developer configured the properties for a Click activity on an element inside a web page as shown in the following exhibit.

An animation on the web page never completely loads but the element indicated in the Click activity does load within the specified timeout duration. What occurs when this Click activity executes?

• A. Element is clicked once the element is fully loaded.
• B. Timeout error occurs without clicking on the element.
• C. Waits 10 seconds before clicking on the element.
• D. Continues to the next activity after 30 seconds without clicking on the element.

Answer: A

Explanation:
The Click activity is used to simulate a mouse click on a specified UI element, such as a button or a link1. It has several properties that can be configured to customize its behavior, such as the input method, the click type, the timeout, and the wait for ready1.
✑ The input method determines how the click is performed. It can be Default,
Simulate, or Window Messages. The Default method uses the hardware driver to simulate the click, and it requires the target element to be visible and in focus. The Simulate and Window Messages methods use the technology of the target application to inject the click, and they can work in the background, even if the target element is hidden or minimized2.
✑ The click type determines which mouse button is used for the click. It can be
Single, Double, Down, or Up. The Single and Double types perform a single or double click using the left mouse button. The Down and Up types perform a press or release action using any mouse button1.
✑ The timeout determines how long the activity waits for the target element to appear
before throwing an error. It is measured in milliseconds, and it has a default value of 30000 (30 seconds). If the timeout is exceeded, the activity fails with a TimeoutException1.
✑ The wait for ready determines when the activity executes. It can be None,
Interactive, or Complete. The None option executes the activity immediately. The Interactive option executes the activity after the target element is loaded. The Complete option executes the activity after the target application is loaded1.
In your case, you have configured the properties for the Click activity as follows:
✑ Input method: Simulate
✑ Click type: Single
✑ Timeout: 30000
✑ Wait for ready: Complete
This means that the Click activity will use the Simulate method to perform a single click on the target element in the background, after waiting for 30 seconds or until the target application is fully loaded, whichever comes first.
Since you have mentioned that an animation on the web page never completely loads but the element indicated in the Click activity does load within the specified timeout duration, what occurs when this Click activity executes is:
Element is clicked once the element is fully loaded.
This is because the Simulate method can work in the background, even if the web page is hidden or minimized, and it does not depend on the animation to complete. The Complete option for wait for ready ensures that the Click activity waits until the target element is loaded before clicking on it. The timeout value of 30000 does not affect this scenario, because it is not exceeded.
Therefore, option A is correct.
References:
✑ Click - UiPath Documentation Portal.
✑ What are different Input methods in UiPath - UiPath Community Forum.

NEW QUESTION 3
Once "Library A" has been imported as a dependency in the current project, how can the UI Object Repository defined in "Library A" be accessed?

• A. The Object Repository is only available in a Library.
• B. The Object Repository needs to be exported as a UI Library and imported in the Process for it to become available.
• C. The Object Repository will automatically be available in the Process.
• D. The Object Repository cannot be passed between a Process and a Library.

Answer: C

Explanation:
The UI Object Repository is a feature that allows you to store and reuse UI elements across different automation projects1. A UI Library is a type of project that contains UI elements and workflows that can be used as dependencies in other projects2. When you import a UI Library as a dependency in your current project, the UI Object Repository defined in the UI Library will automatically be available in your current project3. You can access the UI elements from the Object Repository panel in Studio and use them in your activities4. Therefore, the correct answer is C. The other options are incorrect because they do not reflect the actual behavior of the UI Object Repository and the UI Library.
References: Object Repository documentation, Reusing Objects and UI Libraries documentation, Object Repository course, [Object Repository in Studio course].

NEW QUESTION 4
A developer has created a variable of type List of Strings named "UsersList", and initialized it with an empty list: "UsersList = new List(Of String)".
What is printed in the log message after the following Invoke Code is executed?

• A. 2
• B. Object reference not set to an instance exception is thrown
• C. System Argument Exception is thrown

Answer: A

Explanation:
The code is adding two items to the list, but since the list is initialized as an empty list, the count will be 0.
References:
✑ Data Manipulation with Lists and Dictionaries in Studio course, Lesson 2: Lists, Topic: Creating Lists
✑ How to initiate List<String[]>? forum post, Answer by @VishalS

NEW QUESTION 5
DRAG DROP
How should the computation of the signature be done for client apps that receive Orchestrator requests and need to check their authenticity?
Instructions: Drag the Description found on the left and drop on the correct Step Sequence found on the right.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 6
What is the main benefit of importing profiling sessions?

• A. Enables the analysis of potential flow issues.
• B. Provides context menu options for profiling actions.
• C. Disables focus on imported profiling sessions.
• D. Disables the analysis of potential flow issues.

Answer: A

Explanation:
The main benefit of importing profiling sessions is that it enables the analysis of potential flow issues in the automation workflows. By importing profiling sessions, the developer can examine previous runs and compare them with the current run. This can help the developer to identify which workflows or activities take longer to execute, which ones consume more resources, and which ones cause errors or exceptions. The developer can also use the Profiler app to visualize the profiling data and drill down into the details of each operation.
This way, the developer can optimize the performance and reliability of the automation workflows and improve the user experience.
References:
✑ Studio - Profile Execution - UiPath Documentation Portal
✑ Process Mining - Application Profiling - UiPath Documentation Portal

NEW QUESTION 7
A developer is using the Step Out action in Debug mode to review a process as shown in the following exhibit.

Which functionality does the Step Out action provide?

• A. Pauses at an activity that caused an error
• B. Re-executes the activity which threw an exception
• C. Executes only one activity at a time and then pauses
• D. Executes activities in the current container and then pauses

Answer: D

Explanation:
The Step Out action is used for stepping out and pausing the execution at the level of the current container. Step Out completes the execution of activities in the current container, before pausing the debugging. This option works well with nested sequences1. In the exhibit, the Step Out action will execute all the activities inside the Sequence container and then pause at the next activity in the Main workflow. References: Debugging Actions from UiPath documentation.

NEW QUESTION 8
A developer is automating the process of entering sensitive information into text input fields that are constantly changing their position. Each text input field has a corresponding text label. The developer decides to automate the process by using Modern UI Activities with anchors. Which activities should be used?

• A. Find Text Position activity as the anchor and Type Secure Text activity as the action.
• B. Type Into activity with a valid anchor and the input text provided in the Secure Text property.
• C. Find Text Position activity as the anchor and Set Text activity as the action.
• D. Type Into activity with a valid anchor and the input text provided in the Text property.

Answer: A

Explanation:
The Find Text Position activity is used to find the position of a text on the screen and return it as a UiElement variable. This can be used as an anchor to locate the text input field that corresponds to the text label. The Type Secure Text activity is used to type a password or other sensitive information into a UI element, without revealing the actual text. The input
text is provided as a SecureString variable, which is encrypted and cannot be viewed in plain text. This ensures that the sensitive information is entered securely and accurately into the text input field.
References:
✑ Find Text Position - UiPath Activities
✑ Type Secure Text - UiPath Activities
✑ UiPath Anchor Base Tutorial & AnchorPosition Example

NEW QUESTION 9
A developer wants to create an automation in which the input from the user and pre- defined conditions determine the transition between stages. In UiPath Studio, which is the recommended type of workflow that meets the requirement?

• A. Workflow
• B. Global Exception Handler
• C. Flowchart
• D. State Machine

Answer: C

Explanation:
A flowchart is a type of workflow that allows developers to create complex and dynamic automation processes that can branch based on user input or predefined conditions. Flowcharts use graphical elements such as shapes, connectors, and annotations to
represent the flow of logic and data between different stages or activities. Flowcharts are suitable for scenarios where the automation process is not linear or sequential, but rather depends on various factors and decisions. (UiPath Automation Developer study guide) References:
✑ Flowchart
✑ Types of Workflows

NEW QUESTION 10
DRAG DROP
A developer loaded an existing workflow that uses Ul Automation in Google Chrome. The Google Chrome extension has not been installed on the developer's machine How should the developer load the Google Chrome extension from UiPath Studio?
Instructions: Drag the Description found on the left and drop on the correct Step found on the right.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 11
A developer executes the following workflow in Debug mode with "Continue on Exception " enabled.

How many times will the workflow pause the execution?

• A. 1
• B. 2
• C. 3

Answer: B

Explanation:
The workflow will pause the execution only once when it is executed in Debug mode with “Continue on Exception” enabled. Debug mode is a mode of execution that allows the developer to test and troubleshoot the workflow by using various debugging tools, such as breakpoints, step actions, and output messages4. “Continue on Exception” is a debugging option that enables the execution to continue even if an exception is encountered, without displaying the error message or stopping at the faulty activity5. In the workflow, there are two activities that can throw exceptions: the “Throw” activity, which throws a custom exception with the message “This is an exception”, and the “Write Line” activity, which writes the value of the “Var” variable to the Output panel. The “Var” variable is not initialized, so it has a null value by default. When the “Write Line” activity tries to write the null value, it throws a NullReferenceException, as explained in the previous question. However, since the “Continue on Exception” option is enabled, the execution does not stop at the “Write Line” activity, but continues to the next activity, which is the “Throw” activity. The “Throw” activity throws the custom exception, which is caught by the “Catch” section of the “Try Catch” activity. The “Catch” section contains a “Log Message” activity, which writes the exception message to the Output panel. The execution then moves to the “Finally” section, which contains a “Write Line” activity with the text “This is the end”. The workflow then ends successfully. The only time the execution pauses is when it reaches the breakpoint that is set at the “Throw” activity. A breakpoint is a debugging tool that allows the developer to pause the execution at a specific activity and inspect the values of the variables and arguments, as well as the output messages6. The developer can then resume the execution by using the step actions or the continue button7. Therefore, the workflow will pause the execution only once at the breakpoint, and not at the exceptions, as they are ignored by the “Continue on Exception” option. References: Debugging a Workflow, Debugging Actions, Breakpoints, and Continue on Exception from UiPath documentation.

NEW QUESTION 12
A developer is using the REFramework template to automate a process. In "SetTransactionStatus" file, there is the following sequence of activities, where the last Log Message activity was added by
the developer:

The configuration for Add Log Fields and Remove Log Fields activities are shown below: Add transaction log fields (Success)


The developer runs the process and notices the argument values for the first transaction are:
in_TransactionlD = "07/18/2023 10:27:29" io_TransactionNumber = 1 in_TransactionField1 = "UI235-80" in_TransactionField2 = "Update Request"
Which of the following Log Message Details will be displayed when executing the activity Log Message Completed for the first transaction, considering it is successful?
A.
"message": "Transaction Completed", "level": "Information",
"logType": "User",
"timeStamp": "10:30:19", "fileName": "SetTransactionStatus", "processVersion": "1.0.0",
"jobId": "59325301-680a-4d55-a81b-56ca1f369c12",
"robotName": "test.robot", "machineId": 0, "logF_TransactionField2": "" "logF_TransactionStatus": "logF_TransactionID"; "",
"logF_BusinessProcessName": "Framework", "logF_TransactionNumber": "" "logF_TransactionField1":
}
B.
"message": "Transaction Completed", "level": "Information",
"logType": "User",
"timeStamp": "10:30:19", "fileName": "SetTransactionStatus", "processVersion": "1.0.0",
"jobId": "cb865477-35f8-4c0a-93e9-e4f4246223f2",
"robotName": "test.robot", "machineId": 0,
"logF_TransactionField2": "Update Request", "logF_TransactionID": "07/18/2023 10:27:29", "logF_BusinessProcessName": "Framework", "logF_TransactionNumber": "1", "logF_TransactionField1": "UI235-80", "logF_TransactionStatus": "Success"

• A. "message": "Transaction Completed", "level": "Information","logType": "User","timeStamp": "10:30:19", "fileName": "SetTransactionStatus", "processVersion": "1.0.0","jobId": "f8a36a46-8ebc-40df-8f71-26b39087ebee", "robotName": "test.robot","machineId": 0, "logF_BusinessProcessName": "Framework"}D."message": "Transaction Completed","level": "Information", "logType": "User","timeStamp": "10:30:19", "fileName": "SetTransactionStatus", "processVersion": "1.0.0","jobId": "59325301-680a-4d55-a81b-56ca1f369c12","robotName": "test.robot", "machineId": 0, "logF_TransactionField2": empty, "logF_TransactionStatus": empty, "logF_TransactionID": empty,"logF_BusinessProcessName": "Framework", "logF_TransactionNumber": empty, "logF_TransactionField1": empty}

Answer: B

Explanation:
The Log Message activity is used to write a diagnostic message at a specified level to the output panel, the log file, and Orchestrator1. The message can include custom log fields that are added by the Add Log Fields activity and removed by the Remove Log Fields activity2. In this case, the developer has added six log fields in the Add transaction log fields (Success) sequence and removed three of them in the Remove transaction log fields sequence. Therefore, the remaining three log fields (logF_TransactionField2, logF_TransactionID, and logF_TransactionStatus) will be displayed along with the default log fields (message, level, logType, timeStamp, fileName, processVersion, jobId, robotName, and machineId) when executing the Log Message Completed activity. The values of the log fields will be taken from the corresponding arguments of the Set Transaction Status activity.
References:
✑ Add Log Fields activity documentation from UiPath
✑ Remove Log Fields activity documentation from UiPath
✑ Log Message activity documentation from UiPath

NEW QUESTION 13
In an RPA Testing project, you created the mock "MySequencemock" for the file "MySequence". You have to update "MySequence" and add a Log Message activity and a Verify Expression activity.
What will happen to "MySequencemock" file when you save the project, assuming that the file is closed?

• A. Only the Log Message activity will be added to the mock file.
• B. Only the Verify Expression activity will be added to the mock file.
• C. The changes made in "MySequence" workflow file are applied to the mock file.
• D. The changes made in "MySequence" workflow file are not applied to the mock file.

Answer: D

Explanation:
A mock file is a copy of a workflow file that is used to simulate the behavior of the original workflow without affecting it1. When you create a mock file, the original workflow file is automatically added to the project dependencies, and the mock file is added to the test folder2. If you update the original workflow file, the changes are not reflected in the mock file, unless you manually update the mock file as well3. Therefore, if you add a Log Message activity and a Verify Expression activity to “MySequence” workflow file and save the project, the “MySequencemock” file will remain unchanged.
References:
✑ Mock Testing documentation from UiPath
✑ Create Mocks documentation from UiPath
✑ Feature request: Allow to rename Mock files forum post from UiPath Community

NEW QUESTION 14
A developer wants to run two processes on the same machine, the first process contains only HTTP Request activities and the second one performs UI Automation. What option needs to be enabled on the first process in order to ensure that the processes can run concurrently on the same machine?

• A. Starts in Background
• B. Attended Automation
• C. Disable Pause
• D. Supports Persistence

Answer: A

Explanation:
The Starts in Background option is a property of the process that indicates whether the process can run in parallel with other processes on the same machine. If this option is enabled, the process can run as a background process, meaning that it does not require user interaction or UI automation. This allows the process to run concurrently with another process that performs UI automation, such as the second process in the question. The Starts in Background option can be configured in the project settings of the process in UiPath Studio, or in the process settings in Orchestrator.
References:
✑ Background Process - UiPath Studio
✑ Background Process Automation - UiPath Robot
✑ Managing Processes - UiPath Orchestrator

NEW QUESTION 15
A developer has defined an Int32 variable called IntVar The developer has written the following expression in a Log Message activity.
Convert. ToBoolean(lntVar)
If IntVar = 0, what is displayed in the Output panel after the execution of the Log Message activity?

• A. The value True is displayed
• B. A System ArgumentNullException is displayed
• C. A System.InvalidCastException is displayed
• D. The value False is displayed

Answer: D

Explanation:
The Convert.ToBoolean method converts a specified value to a Boolean value, which can be either True or False. The method can accept different types of values, such as numbers, strings, objects, etc. However, the conversion rules depend on the type of the value. For numbers, the conversion rule is as follows1:
✑ If the value is zero, the method returns False.
✑ If the value is non-zero, the method returns True.
Therefore, if the IntVar variable is an Int32 variable with the value 0, the expression Convert.ToBoolean(IntVar) will return False. The Log Message activity will display the
value False in the Output panel after the execution. References: Convert.ToBoolean Method from UiPath documentation.

NEW QUESTION 16
What is the output type returned when using a Get Test Data Queue Item activity?

• A. Dictionary
• B. Dictionary
• C. Object
• D. Queueltem

Answer: A

Explanation:
The Get Test Data Queue Item activity is used to retrieve a test data queue item from Orchestrator and store it in a variable. The output type of the variable is Dictionary, which means that it is a collection of key-value pairs that can be accessed by using the key name. For example, if the test data queue item contains the fields Name, Age, and Gender, then the output variable can be used to get the values of these fields by using expressions like outputVar(“Name”), outputVar(“Age”), or outputVar(“Gender”). (UiPath Studio documentation1)
References:
✑ 1: Get Test Data Queue Item - UiPath Activities.

NEW QUESTION 17
......