Want to know features? Want to lear more about experience? Study . Gat a success with an absolute guarantee to pass Cisco 200-150 (DCICN Introducing Cisco Data Center Networking) test on your first attempt.
Free demo questions for Cisco 200-150 Exam Dumps Below:
NEW QUESTION 1
What can you tell about server ports and their external Interfaces from the exhibits?
- A. vfc3/1 is not correctly connected to server external interface fc2/1.
- B. vfc3/1 is not correctly connected to server external Interface fc2/1 and flogi are unsuccessful.
- C. Server interface vfc3/1 is assigned to NP uplinks fc2/1. fc2/2, fc2/3. and fc2/4. There are 4 successful flogi.
- D. Server interface vfc3/1 is assigned to NP uplinks fc2/1, fc2/2, fc2/3, and fc2/4. There are 4 flogi are in initialization state.
Answer: C
NEW QUESTION 2
The nWWN is assigned to which SANfabric component?
- A. a Fibre Channel adapter
- B. a disk
- C. an SFP module
- D. a Fibre Channel interface
Answer: D
NEW QUESTION 3
Which field in an Ethernet II frame performs the same function as the DSAP field in an 802.3 Ethernet frame?
- A. Start of frame
- B. EtherType
- C. Frame check sequence
- D. Subnetwork Access Protocol
- E. Logical Link Control
Answer: B
NEW QUESTION 4
A network engineer is verifying Layer 2 connectivity of a server to a Cisco Nexus switch by checking the Address Resolution table statistics. Which command shows the MAC address, physical interfaced, VLAN and IP address of a server on a Cisco Nexus switch?
- A. show Ip arp interface
- B. show Ip arp
- C. show Ip arp detail
- D. show arp detail
Answer: C
NEW QUESTION 5
Which description of a multiple-initiator target zone is true?
- A. It uses more TCAM than a single-initiator single target zone.
- B. It increases the number of zones.
- C. It uses less TCM space than a single-initiator target zone.
- D. It blocks RSCNs between initiators.
Answer: A
NEW QUESTION 6
Which two statements are true regarding disruptive load balancing and regarding the configuration In this example? (Choose two).
- A. In this scenario disruptive load balancing is disabled.
- B. In this scenario disruptive load balancing is enabled.
- C. Since FCID: 0x1 c0000 is reserved, disruptive load balancing is not configured correctly.
- D. When disruptive load balancing is enabled, NPV redistributes the server interfaces across all available NP uplinks when a new NP uplink becomes operationa
- E. To move a server interface from one NP uplink to another NP uplin
- F. NPV forces re initialization of the server interface so that the server performs a new login to the core switch.
Answer: CD
NEW QUESTION 7
What layer of the OSI Model provides the logical addressing that routers use for path determination?
- A. transport
- B. network
- C. application
- D. presentation
Answer: B
NEW QUESTION 8
Which premise-based conferencing solution supports Skype for Business and WebRTC?
- A. Telepresence Server
- B. Cisco Meeting Server
- C. Spark
- D. Cisco WebEx
Answer: B
NEW QUESTION 9
Refer to the exhibit.
Which type of port is used to connect an edge switch in NIPV mode to the core switch?
- A. E
- B. F
- C. NP
- D. TE
Answer: C
NEW QUESTION 10
Which description of a FLOGI database is true?
- A. It displays the status of the various VSANs in the fabric.
- B. it indicates the devices that connect directly to the switch.
- C. It shows the switch of the zones on the Local switch.
- D. It travels VSAN s in the network.
Answer: B
NEW QUESTION 11
A network design team has decided to use a standard protocol to consolidate the Ethernet and San data using the existing Nexus switches. Which I/O technology can satisfy this need?
- A. FCoE
- B. IEEE 802. 1AB
- C. SCS
- D. AToM
Answer: A
NEW QUESTION 12
Which two terms can take the place of the wildcard mask in an ACL?
- A. eq
- B. deny
- C. host
- D. all
- E. any
Answer: BC
NEW QUESTION 13
What are two physical subcomponents of the Cisco UCS C-Series server? (Choose two.)
- A. memory extension node
- B. hard drive
- C. fabric interconnect
- D. power supply
- E. compute node
Answer: AD
NEW QUESTION 14
Which deployment model is the solution to accommodate fail-over for Cisco Meeting Server?
- A. Single Combined Server Deployment
- B. Single SplitServer Deployment
- C. Scaled and Combined Server Deployment
- D. Scaled and Resilient Server Deployment
Answer: D
NEW QUESTION 15
A network uses on pair of Layer 3 switches for core and distribution purposes. Which design is this network using?
- A. collapsed core
- B. collapsed distribution
- C. collapsed Layer 3 core
- D. collapsed Layer 2-3
Answer: A
NEW QUESTION 16
Which three attributes can be configured when creating a new user account on a Cisco Nexus 5000 Series Switch? (Choose three.)
- A. username
- B. password
- C. expiry date
- D. access list
- E. role feature
- F. authentication server
Answer: ABC
NEW QUESTION 17
Which is an endpoint supported by Cisco Unified Communications Manager?
- A. Legacy H 323 endpoints
- B. CMAClients
- C. immersive Telepresence endpoints
- D. Jabber Video
Answer: C
P.S. Simply pass now are offering 100% pass ensure 200-150 dumps! All 200-150 exam questions have been updated with correct answers: https://www.simply-pass.com/Cisco-exam/200-150-dumps.html (177 New Questions)