Cause all that matters here is passing exam with . Cause all that you need is a high score of . The only one thing you need to do is downloading free now. We will not let you down with our money-back guarantee.

Free 200-150 Demo Online For Microsoft Certifitcation:

NEW QUESTION 1
On which two components of a router can a copy of a running-configuration file be saved manually by an engineer for backup purposes? (Choose two.)

  • A. NVRAM
  • B. Flash
  • C. ROM
  • D. RAM
  • E. DRAM

Answer: AB

NEW QUESTION 2
Switch A has BPDU fitering configured on all active interfaces. A second switch, Switch B, is connected to Switch A. Which two actions will Switch A take when Switch B is connected to it? (Choose two.)

  • A. Switch A will not send any BPDUs.
  • B. Switch A will transition the port a normal spanning tree port.
  • C. Switch A will not accept any BPDUs
  • D. Switch A will errdisable the port.
  • E. Switch A will start sending BPDUs to Switch B.

Answer: AD

NEW QUESTION 3
Which protocol is supported when OSPFv2 is used as the routing protocol?

  • A. NetBios
  • B. LAT
  • C. IPv4
  • D. IPv6

Answer: C

NEW QUESTION 4
What is the command sequence to force a Cisco Nexus 6000 switch to boot using the golden BIOS image?

  • A. Press Ctrl-Shift-6 within 30 seconds of when power is supplied to the switch.
  • B. Press Ctrl-] within 2 seconds of when power is supplied to the switch.
  • C. Press Ctrl-] within 30 seconds of when power is supplied to the switch.
  • D. Press Ctrl-Shift-6 within 2 seconds of when power is supplied to the switch.

Answer: D

NEW QUESTION 5
What are two features of a bridge? (Choose two.)

  • A. Reliable transmission
  • B. Operate at OSI Layer 2
  • C. Operate at OSI Layer 3
  • D. Create multiple broadcast domains
  • E. Create multiple collision domains
  • F. Flood input packets to all ports
  • G. Drop IP packets with invalid destination ports

Answer: BE

Explanation: "- a bridge is a two interfaces device that creates 2 collision domains, since it forwards the traffic it receives from one interface only to the interface where the destination layer 2 device (based on his mac address) is connected to. A bridge is considered as an "intelligent hub" since it reads the destination mac address in order to forward the traffic only to the interface where it is connected"
https://learningnetwork.cisco.com/thread/1734

NEW QUESTION 6
Which two of the following statements are true with respect to STP in this network? (Choose 2)

  • A. Both 5k’s have BPDU Guard and BPDU Filter enabled by default, while both 7k’s do not
  • B. Both 5k’s bridge Assurance enabled, while both 7k’s do not
  • C. 7k’s is the root bridge for VLANs 100-150
  • D. Both 7K-3 and 7k-4 being vPC peers, are the root bridge for VLANs 100-150
  • E. No devices have a root cost higher than 1, since all devices are no more that 1 hop away from each other

Answer: BE

NEW QUESTION 7
Drag and drop the feature on the left to the correct description on the right.
200-150 dumps exhibit

    Answer:

    Explanation: Authorization = Provide access control and verifies whether the connected user can execute a submitted
    command.
    Authentication = The process of verifying the identity of the person or device accessing the resource. Accounting = Provides a method to collect and log information, and send the information to the AAA server
    for billing, auditing, and reporting
    RBAC = A method of restricting or authorization system access for users based on user roles and locales.

    NEW QUESTION 8
    200-150 dumps exhibit
    Refer to the exhibit. Two Layer 2 Cisco Nexus switches are connected to application servers in a data center. Server A cannot communicate with servers that are in VLANs 3 and 4, but t can communicate with server B and C. What is the cause of the problem?

    • A. inter VLANs routing is not enabled on both switches
    • B. Switch I and switch 2 are not physically connected via an access link.
    • C. A router must be connected to both switches and provide inter VLAN routing.
    • D. Switch 1 and switch 2 not physically connected via a trunk link.

    Answer: C

    NEW QUESTION 9
    Which communication type uses a one-to-many model to replicate packets that are delivered to many interested recipients?

    • A. unknown unicast
    • B. broadcast
    • C. unicast
    • D. multicast

    Answer: D

    NEW QUESTION 10
    Which two options are multicast addresses? (Choose two.)

    • A. FD00::2
    • B. 192.168.2.2
    • C. FF05::2
    • D. 226.10.10.10
    • E. 240.1.0.1

    Answer: CD

    NEW QUESTION 11
    When comparing TCP and UDP segments, which two fields are found only in TCP segment? (Choose two.)

    • A. Checksum
    • B. acknowledgement
    • C. length
    • D. source
    • E. Sequence number

    Answer: DE

    NEW QUESTION 12
    Which protocol data unit is associated with the link layer of the TCP/IP model?

    • A. frame
    • B. packet
    • C. segment
    • D. datagram

    Answer: A

    NEW QUESTION 13
    Which description of the AAA accounting feature is true?

    • A. It regulates which options a user can access on a switch.
    • B. It maintains a log of every management session used to access a switch.
    • C. It verifies the identity of a user who is accessing a switch.
    • D. It assembles a set of attributes that describe what a user is authorized to perform.

    Answer: B

    NEW QUESTION 14
    Which two addresses represent multicast addresses? (Choose two.)

    • A. 224.1.47.5
    • B. 240.100.22.3
    • C. FF05::1
    • D. 2001::1

    Answer: AC

    NEW QUESTION 15
    Where are license keys entered in TMS?

    • A. Administrative Settings
    • B. Diagnostics
    • C. General Settings
    • D. Maintenance

    Answer: C

    NEW QUESTION 16
    Which statement describes the uses of zones in a VSAN?

    • A. Zones are configured at the fabric core.
    • B. An HBA or storage device can only belong to zone.
    • C. Zones limit unicast, multicast, and broadcast traffic.
    • D. Zones are a group of sports within a single VSAN.

    Answer: C

    NEW QUESTION 17
    What is the minimum number of disks that are needed in RAID 1?

    • A. 4 disks
    • B. 2 disks
    • C. 8 disks
    • D. 16 disks

    Answer: B

    Thanks for reading the newest 200-150 exam dumps! We recommend you to try the PREMIUM prep-labs.com 200-150 dumps in VCE and PDF here: https://www.prep-labs.com/dumps/200-150/ (177 Q&As Dumps)