It is impossible to pass Cisco 300 075 ciptv2 exam without any help in the short term. Come to Exambible soon and find the most advanced, correct and guaranteed Cisco 300 075 ciptv2 practice questions. You will get a surprising result by our Up to date Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) practice guides.
Q31. Which action configures PSTN backup for calls that are rejected by the gatekeeper CAC?
A. Configure AAR in Cisco Unified Communications Manager.
B. Configure CFUR in Cisco Unified Communications Manager.
C. Configure a route pattern, a route list, and route groups to a trunk and a gateway in Cisco Unified Communications Manager.
D. Configure a route pattern to a gateway in Cisco Unified Communications Manager.
Answer: C
Q32. DRAG DROP
Answer:
Q33. Refer to the exhibit.
Assume that the HQ phones have access to the HQ partition, and BR phones have access to the BR partition. Which set of implementations would best address the overlapping directory number extensions for intersite (WAN) calling between the HQ site and the BR site?
A. Configure a route pattern 8222.[12]XXX for site HQ, and assign it to partition HQ. Configure the called party DDI of Predot.Configure a route pattern for site BR 8111.[1-3]XXX, and assign it to partition BR. Configure called party DDI Predot.Use the local gateway at each site. Prefix the appropriate site code for the calling number.
B. Configure a single route pattern for both sites 8[12,12,12].[1-32]XXX. Use a route list that contains the local route group for each site. Prefix the appropriate site code for the calling number.
C. Configure a translation pattern 8222.[12]XXX for site HQ, and assign it to partition HQ. Use a CSS that contains the partitions for BR phones.Configure a translation pattern 8111.[1-3]XXX for site BR, and assign it to partition BR. Use a CSS that contains the partitions for HQ phones.For both translation patterns, configure the called party DDI of Predot. Prefix the appropriate site code for the calling number.
D. Configure a translation pattern 8222.[12]XXX for site HQ, and assign it to partition BR. Use a CSS that contains the partitions for HQ phones.Configure a translation pattern 8111.[1-3]XXX for site BR, and assign it to partition HQ. Use a CSS that contains the partitions for BR phones.For both translation patterns, configure the called party DDI of Predot. Prefix the appropriate site code for the calling number.
Answer: C
Q34. Which two options should be selected in the SIP trunk security profile that affect the SIP trunk pointing to the VCS? (Choose two.)
A. Accept Unsolicited Notification
B. Enable Application Level Authorization
C. Accept Out-of-Dialog REFER
D. Accept Replaces Header
E. Accept Presence Subscription
Answer: A,D
Q35. The network administrator of Enterprise X receives reports that at peak hours, some calls between remote offices are not passing through. Investigation shows no connectivity problems. The network administrator wants to estimate the volume of calls being affected by this issue. Which two RTMT counters can give more information on this? (Choose two.)
A. CallsRingNoAnswer
B. OutOfResources
C. LocationOutOfResources
D. RequestsThrottled
E. CallsAttempted
Answer: B,C
Q36. How many active gatekeepers can you define in a local zone?
A. 1
B. 2
C. 5
D. 10
E. 15
F. unlimited
Answer: A
Q37. Which statement about the function of a gatekeeper is true?
A. A gatekeeper improves call routing between servers within a single Cisco Unified Communications Manager cluster.
B. A gatekeeper can replace the dial plan of a Cisco Unified Communications Manager cluster.
C. A gatekeeper can simplify the dial plan between many different Cisco Unified Communications Manager clusters.
D. Gatekeepers can be implemented to deploy RSVP-based CAC.
Answer: C
Q38. Which statement is correct about AAR?
A. The end users see, "Network Congestion Rerouting?" but AAR is otherwise transparent to the end user and works without user intervention.
B. AAR will display "not enough bandwidth" on the IP phone while it reroutes the call.
C. AAR allows calls to be rerouted because of insufficient Cisco Unified Border Element controlled bandwidth to an ITSP.
D. AAR allows calls to be rerouted due to insufficient gatekeeper controlled IP WAN bandwidth.
Answer: A
Explanation:
Incorrect Answer: B, C, D Automated alternate routing (AAR) provides a mechanism to reroute calls through the PSTN or other network by using an alternate number when Cisco Unified Communications Manager blocks a call due to insufficient location bandwidth. With automated alternate routing, the caller does not need to hang up and redial the called party. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b03aar.ht ml
Q39. Refer to the exhibit.
The exhibit shows centralized Cisco Unified Communications Manager configuration components for TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for international calls to the U.S. To match the US-TEHO pattern \+!, how should the translation pattern be configured?
A. 9001.4085551234 with the Called Party Transformation:Discard Digits PreDotPrefix Digits Outgoing Calls: +
B. 9.0014085551234 with the Called Party Transformation:Discard Digits PreDotPrefix Digits Outgoing Calls: +1
C. 900.14085551234 with the Called Party Transformation:Discard Digits PreDotPrefix Digits Outgoing Calls: +1
D. 900.14085551234 with the Called Party Transformation:Discard Digits PreDotPrefix Digits Outgoing Calls: +
E. 001.4085551234 with the Called Party Transformation:Prefix Digits Outgoing Calls: +
Answer: D
Explanation:
Incorrect Answer: A, B, C The PSTN access code for the UK is 9, International call code is 001, The international escape character, +, signifies the international access code in a complete E.164 number format Link: http://www.ciscosystems.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a03r p.html
Q40. With Cisco Extension Mobility, when a user logs in to a phone type which has no user device profile, what will happen to the phone?
A. The phone takes on the default clusterwide device profile.
B. The phone creates a new device profile automatically.
C. The phone immediately logs the user off.
D. The phone crashes and reboots.
Answer: A
Q41. Which two options must be selected in the SIP Trunk Security Profile configuration between Cisco Unified Communications Manager and Expressway? (Choose two)
A. Enable application-level authorization
B. Accept presence subscription
C. Accept out-of-dialog refer
D. Accept unsolicited notification
E. Accept replaces header
F. Transmit security status
G. Allow charging header
Answer: D,E
Q42. What component acts as a user agent for both ends of a SIP call while Cisco Unified SIP SRST is providing failover during a WAN outage?
A. B2BUA
B. SIP server
C. SIP proxy
D. SIP SRST router
E. SIP registrar
Answer: A
Q43. Which command can be used to manually send the MGCP gateway to register with the secondary Cisco Unified Communications Manager server?
A. ccm-manager switchover-to-backup
B. mgcp use backup
C. ccm-manager register backup
D. not supported
Answer: A
Q44. This is the configuration on the voice gateway:
telephony-service
max-ephones 30
max-dn 60 preference 0
srst mode auto-provision all
srst dn line-mode dual
srst dn template 3 srst ephone description
srst fallback auto-provision phone
srst ephone template 5
Which ephone-dn would be expected upon activation of SRST?
A. ephone-dn 1 dual-linenumber 7001description 7001name 7001ephone-dn-template 5This DN is learned from srst fallback ephones
B. ephone-dn 1 dual-linenumber 7001description 7001name 7001ephone-dn-template 3This DN is learned from srst fallback ephones
C. ephone-dn 1number 7001description 7001name 7001ephone-dn-template 5This DN is learned from srst fallback ephones
D. ephone-dn 1number 7001description 7001name 7001ephone-dn-template 3This DN is learned from srst fallback ephones
Answer: A
Q45. Which action configures transcoding resources in Cisco Unified Communications Manager to function with branch office Cisco IP Phones?
A. Configure the branch office IP phones with CSS and partitions.
B. Configure the branch office IP phones with MRGs and MRGLs.
C. Configure the branch office IP phones with regions.
D. Configure the branch office IP phones with locations.
Answer: B