Exam Code: 199-01 (Practice Exam Latest Test Questions VCE PDF)
Exam Name: Riverbed Certified Solutions Professional
Certification Provider: Riverstone
Free Today! Guaranteed Training- Pass 199-01 Exam.
Q136. In a Steelhead deployment, the customer decides to use Full Transparency and block all incoming/outgoing TCP connections on port 7800 on their firewall. However, they are finding all TCP connections are passing through the Steelheads (even ones that should be optimized via the in-path rule set).
If Full Transparency uses the original IP addresses and TCP ports for inner connections, what is needed to fix the problem?
A. "no in-path enable"; since we don't really need in-path in this case
B. "destination oobtransparency"; since the OOB (out-of-band) splice needs transparency also
C. "inner connection max 50"; since the default inner connection pool count of 20 is insufficient
D. No command needed, the connections are really optimized even though we report connections are passed through
Answer: B
Q137. Two Steelhead appliances deployed in-path at different offices cannot auto-discover each other. What technique can be used to "force" the two Steelhead appliances to optimize traffic between each other?
A. Change the TCP port the Steelhead appliances use for their in-path connections to 7810
B. Disable the auto-discovery feature on the Steelhead appliances
C. Create auto-discovery rules that map to each Steelhead appliance's in-path IP address
D. Create fixed-target rules on each Steelhead appliance using the in-path IP address of the other Steelhead appliance, and use port 7800
E. Use the "enable probe" command from the CLI
Answer: D
Q138. What are the methods to upload an RSP package? (Select 3)
A. tftp
B. scp
C. ftp
D. ssh
E. http
Answer: BCE
Q139. The purpose of Intelligent Forwarding is to:
A. Automatically detect Steelhead appliances in the network B. Help prevent network loops
C. Assist in the creation of static routes on the Interceptor appliance
D. Preclude the need for proper routing
Answer: B
Q140. Refer to the exhibit.
Corp-A and Corp-B have overlapping address space and therefore the network administrator implemented NAT to overcome this. Users from Corp-A NAT to 172.16.1.0/24 and users from Corp-B NAT to 172.16.2.0/24. Users in Corp-A use the destination address of 172.16.2.0/24 to access the resources in Corp-B. The servers in Corp-B use the client IP for authentication. You deploy the Steelhead appliance using the default WAN visibility mode but noticed all the connections are passed-through. What is the likely problem?
A. When the Steelhead appliance in Corp-B opens the outer connection, it is using the source IP of 172.16.2.x instead of 192.168.1.x
B. On the Steelhead appliance in Corp-B, there is a missing static route for the 192.168.1.0/25 network
C. On the Steelhead appliance in Corp-A, there is a missing static route for the 172.16.2.0/24 network
D. When the Steelhead appliance in Corp-B opens the outer connection, it is using the source IP of 192.168.1.x instead of 172.16.1.x
E. None of the above
Answer: D
Q141. What information is available in the System Snapshot files on the Steelhead Mobile Controller?
A. A copy of all memory
B. A copy of hardware registers
C. Status indicators
D. System configs and tcpdumps
E. A, B, and C
Answer: E
Q142. The Primary interface is REQUIRED for which deployment methods and features?
1) In-path
2) Server-side out-of-path
3) Logical in-path (WCCP/PBR)
4) Hybrid Mode
5) Proxy File Services (PFS)
A. 2
B. 1, 2
C. 2, 3
D. 2, 4
E. 2, 4, 5
Answer: E
Q143. What is the default Load Balancing rule on an Interceptor appliance?
A. Redirect
B. Allow
C. Auto
D. Pass-through
Answer: C
Q144. Select the command needed to add support for virtual in-path to your Steelhead appliance so that you can use WCCP or PBR with a Steelhead appliance.
A. in-path inpath0_0 enable
B. in-path oop enable
C. ip virtual enable
D. in-path virtual enable
E. in-path wccp_pbr enable
Answer: B
Q145. Peer affinity is most closely related to:
A. Parallel Interceptor redirection based on Sport ID and client IP
B. Serial Interceptor redirection based on Sport ID to server
C. Segstore ID Steelhead mapping based on Sport ID of Steelhead appliances
D. The shipyard from which Riverbed is most likely to ship Interceptors
Answer: C
Q146. What is the priority bit order for WCCP MASK?
A. Source port, source IP, destination port, destination IP
B. Destination port, source port, destination IP, source IP
C. Source IP, destination port, destination IP, source port
D. Source port, destination port, source IP, destination IP
E. There is no priority order. It is weighted through bit assignments.
Answer: D
Q147. In a WCCP cluster using mask assignments, if there are six Steelhead appliances in the cluster, what is the minimum number of bits that should be used?
A. 1
B. 3
C. 5
D. 6
E. 7
Answer: B
Q148. What is the CLI command for starting the Configuration Wizard?
A. # configuration wizard start
B. (config) # configuration jump-start
C. # configuration start
D. (config) # wizard start
E. restart clean
Answer: B
Q149. While looking at the Current Connections page on a client-side Steelhead, you noticed that there is more CIFS traffic on the WAN than on the LAN for some connections. What may be the problem?
1) The source data is compressed or encrypted
2) File server not located on the same subnet as the server-side Steelhead
3) The Steelhead is counting both CIFS optimized and unoptimized traffic
4) CIFS read-ahead
5) CIFS write-behind
A. 1, 4
B. 4, 5
C. 1, 2, 3
D. 1, 2, 5
E. 3, 5
Answer: A
Q150. Which of the following is Endpoint alarm?
A. Locked secure vault
B. Firewalled status
C. Network interface error
D. Temperature
E. Memory paging
Answer: B