The Secret Of F5-Networks 201 Dump

NEW QUESTION 1
Refer to the exhibit.

A BIG-IP Administrator needs to fall over the active device. The administrator logs into the Configuration Unity and navigates to Device Management > Traffic Group. However, Force to Standby is greyed out What is causing this issue?

• A. The BIG-IP Administrator is NOT logged into command line to tail over
• B. The BIG-IP Administrator is on the Standby Device
• C. The BIG-IP Administrator is logged in as root
• D. The BIG-IP Administrator is logged in as administrator

Answer: B

NEW QUESTION 2
The BIG-IP Administrator generates QKView using tmsh command "qkview -SO". In which directory does the BIG-IP appliance save the QKView?

• A. /etc/tmp
• B. /var/tmp
• C. /shared/qkview
• D. /var /tmp/qkview

Answer: B

NEW QUESTION 3
Which Virtual Server type prevents the use of a default pool?

• A. Performance (Layer 4)
• B. Forwarding (IP)
• C. Performance HTTP
• D. Standard

Answer: B

Explanation:
Forwarding (IP) cannot be associated with the pool.

NEW QUESTION 4
Which two statements are true about SNATs? (Choose two.)

• A. SNATs are enabled on all VLANs, by default.
• B. SNATs can be configured within a Profile definition.
• C. SNATs can be configured within a Virtual Server definition.
• D. SNAT's are enabled only on the VLAN where origin traffic arrives, by default.

Answer: AC

NEW QUESTION 5
When upgrading a BIG-IP redundant pair, what happens when one system has been updated but the other has not?

• A. Synching should not be performed.
• B. The first system to be updated will assume the Active role.
• C. This is not possible since both systems are updated simultaneously.
• D. The older system will issue SNMP traps indicating a communication error with the partner.

Answer: A

NEW QUESTION 6
A configuration change is made on the standby member of a device group.
What is displayed as "Recommended Action" on the Device Management Overview screen?

• A. Force active member of device group to standby
• B. Activate device with the most recent configuration
• C. Synchronize the active member configuration to the group.
• D. Synchronize the standby member configuration to the group

Answer: D

NEW QUESTION 7
Which statement is true concerning the default communication between a redundant pair of BIG-IP devices?

• A. Communication between the systems cannot be effected by port lockdown settings.
• B. Data for both connection and persistence mirroring are shared through the same TCP connection.
• C. Regardless of the configuration, some data is communicated between the systems at regular intervals.
• D. Connection mirroring data is shared through the serial fail over cable unless network failover is enabled.

Answer: B

NEW QUESTION 8
A BIG-IP Administrator explicitly creates a traffic group on a BIG-IP device.
Which two types of configuration objects can be associated with this traffic group? (Choose two.)

• A. Pool Members
• B. Virtual Addresses
• C. iRules
• D. VLANS
• E. Application Instances

Answer: BE

NEW QUESTION 9
What is required for a virtual server to support clients whose traffic arrives on the internal VLAN and pool members whose traffic arrives on the external VLAN?

• A. That support is never available.
• B. The virtual server must be enabled for both VLANs.
• C. The virtual server must be enabled on the internal VLAN.
• D. The virtual server must be enabled on the external VLAN.

Answer: C

NEW QUESTION 10
Which two methods can be used to determine which BIG-IP is currently active? (Choose two.)

• A. The bigtop command displays the status.
• B. Only the active system's configuration screens are active.
• C. The status (Active/Standby) is embedded in the command prompt.
• D. The ifconfig a command displays the floating addresses on the active system.

Answer: AC

NEW QUESTION 11
Refer to the exhibit.

A pool member fails the monitor checks for about 30 minutes and then starts passing the monitor checks. New traffic is Not being sent to the pool member.
What is the likely reason for this problem?

• A. The pool member is disabled
• B. Monitor Type is TCP Half Open
• C. Manual resume is enabled
• D. Time Until Up is zero

Answer: C

NEW QUESTION 12
A BIG-IP device is configured with both an internal external and two Corporate VLANs. The virtual server has SNAT enabled and is set to listen on all VLANs Auto Last Hop is disabled. The Corporate users are on 10.0.0.0./24 and 172.16.0.0/12. The BIG-IP has a Self-IP on the 1.0.0.0.0./24 subnet.
Internet users are able to access the virtual server. Only some of the Corporate users are able to connect to the virtual server A BIG-IP Administrator performs a tcpdump on the BIG-IP and verifies that traffic is arriving from users in 10.0.0.0/24.
What should the BIG-IP Administrator do to correct this behaviour?

• A. Disable the server on the internal VLAN
• B. Add a static route for the 172.16.0.0/12 subnet
• C. Change the default route to point to the extra firewall
• D. Modify the default route of the servers to point to the BIG-IP device

Answer: B

NEW QUESTION 13
A site wishes to perform source address translation on packets from some clients but not others. The determination is not based on the client's IP address, but on the virtual servers their packets arrive on. What could best accomplish this goal?

• A. A SNAT for all addresses could be defined, and then disable the SNAT processing for select VLANs.
• B. Some virtual servers could be associated with SNAT pools and others not associated with SNAT pools.
• C. The decision to perform source address translation is always based on VLA
• D. Thus, the goal cannot be achieved.
• E. The decision to perform source address translation is always based on a client's address (or network).Thus, this goal cannot be achieved.

Answer: B

NEW QUESTION 14
A BIG-IP Administrator needs to apply a license to the BIG-IP system to increase the user count from the base license.
Which steps should the BIG-IP Administrator?

• A. System License > Re-activate> Add-On Registration> Edit
• B. System > License > Re-activate > Base Registration> Edit
• C. Device Management > Devices > Select BIG-IP System > Update
• D. System > Configuration >Device > General

Answer: A

NEW QUESTION 15
A BIG-IP Administrator is performing maintenance on the active BIG-IP device of an HA pair. The BIG-IP Administrator needs to minimize traffic disruptions.
What should the BIG-IP Administrator do to start the maintenance activity?

• A. Reboot the BIG-IP device.
• B. Move resources to a new Traffic Group.
• C. Force the BIG-IP device to standby.
• D. Disable switch ports of the BIG-IP device.

Answer: C

NEW QUESTION 16
......